NX5L2750C_15 Datasheet, PDF (1/16 Pages) NXP Semiconductors – Analog switch with negative swing audio capability

NX5L2750C
Analog switch with negative swing audio capability
Rev. 2 — 7 May 2014
Product data sheet
1. General description
The NX5L2750C is a dual low-ohmic single-pole double-throw analog switch suitable for
use as an analog or digital 2 : 1 multiplexer/demultiplexer. Each switch has a digital select
input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output
(nZ).
The NX5L2750C can switch audio signals with negative swing without the need of a
coupling capacitor.
Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and
fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels
in 3.3 V applications without significant increase in supply current I_CC. It makes it possible
for the NX5L2750C to switch 5 V audio signals with a 1.8 V digital controller, eliminating
the need for logic level translation.
2. Features and benefits
 Supply voltage range from 1.8 V to 5.0 V
 0.8  typical ON resistance
 100 MHz typical bandwidth or data frequency
 CMOS low-power consumption
 1.8 V control logic at V_CC = 3.6 V
 Break-before-make switching
 ESD protection:
 HBM JESD22-A114F Class 3A exceeds 4000 V
 CDM AEC-Q100-011 revision B exceeds 1000 V
 Latch-up performance exceeds 100 mA per JESD 78 Class II Level A
 Specified from 40 C to +85 C
3. Applications
 Cellular phones, PDA
 Portable media players
 Personal media players