74LVC_LVCH16244A_15 Datasheet, PDF (1/19 Pages) NXP Semiconductors – 16-bit buffer/line driver; 5 V input/output tolerant; 3-state

74LVC16244A; 74LVCH16244A
16-bit buffer/line driver; 5 V input/output tolerant; 3-state
Rev. 13 — 7 February 2014
Product data sheet
1. General description
The 74LVC16244A; 74LVCH16244A are 16-bit non-inverting buffer/line drivers with
3-state bus compatible outputs. The device can be used as four 4-bit buffers, two 8-bit
buffers or one 16-bit buffer. It features four output enable inputs, (1OE to 4OE) each
controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a
high-impedance OFF-state.
Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be
applied to the outputs. These features allow the use of these devices in mixed
3.3 V and 5 V applications.
The 74LVCH16244A bus hold on data inputs eliminates the need for external pull-up
resistors to hold unused inputs.
2. Features and benefits
 5 V tolerant inputs/outputs for interfacing with 5 V logic
 Wide supply voltage range from 1.2 V to 3.6 V
 CMOS low power consumption
 Multibyte flow-through standard pin-out architecture
 Low inductance multiple power and ground pins for minimum noise and ground
bounce
 Direct interface with TTL levels
 High-impedance when V_CC = 0 V
 All data inputs have bus hold. (74LVCH16244A only)
 Complies with JEDEC standard:
 JESD8-7A (1.65 V to 1.95 V)
 JESD8-5A (2.3 V to 2.7 V)
 JESD8-C/JESD36 (2.7 V to 3.6 V)
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-B exceeds 200 V
 CDM JESD22-C101E exceeds 1000 V
 Specified from 40 C to +85 C and 40 C to +125 C