|
74HC244D-652 Datasheet, PDF (1/18 Pages) NXP Semiconductors – Octal buffer/line driver; 3-state Rev. 4 — 24 September 2012 | |||
|
74HC244; 74HCT244
Octal buffer/line driver; 3-state
Rev. 4 â 24 September 2012
Product data sheet
1. General description
The 74HC244; 74HCT244 is an 8-bit buffer/line driver with 3-state outputs. The device
can be used as two 4-bit buffers or one 8-bit buffer. The device features two output
enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE
causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes
that enable the use of current limiting resistors to interface inputs to voltages in excess of
VCC.
2. Features and benefits
ï® Input levels:
ïµ For 74HC244: CMOS level
ïµ For 74HCT244: TTL level
ï® Octal bus interface
ï® Non-inverting 3-state outputs
ï® Complies with JEDEC standard no. 7 A
ï® ESD protection:
ïµ HBM JESD22-A114F exceeds 2000 V
ïµ MM JESD22-A115-A exceeds 200 V
ï® Multiple package options
ï® Specified from ï40 ï°C to +85 ï°C and ï40 ï°C to +125 ï°C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
Description
Version
74HC244N
ï40 ï°C to +125 ï°C DIP20
plastic dual in-line package; 20 leads (300 mil)
SOT146-1
74HCT244N
74HC244D
74HCT244D
ï40 ï°C to +125 ï°C SO20
plastic small outline package; 20 leads;
body width 7.5 mm
SOT163-1
74HC244DB
74HCT244DB
ï40 ï°C to +125 ï°C SSOP20
plastic shrink small outline package; 20 leads;
body width 5.3 mm
SOT339-1
74HC244PW
74HCT244PW
ï40 ï°C to +125 ï°C TSSOP20 plastic thin shrink small outline package; 20 leads; SOT360-1
body width 4.4 mm
74HC244BQ
74HCT244BQ
ï40 ï°C to +125 ï°C
DHVQFN20 plastic dual-in-line compatible thermal enhanced SOT764-1
very thin quad flat package; no leads; 20 terminals;
body 2.5 ï´ 4.5 ï´ 0.85 mm
|
▷ |