|
74CBTLVD3861_15 Datasheet, PDF (1/19 Pages) NXP Semiconductors – 10-bit level-shifting bus switch with output enable | |||
|
74CBTLVD3861
10-bit level-shifting bus switch with output enable
Rev. 4 â 14 December 2011
Product data sheet
1. General description
The 74CBTLVD3861 is a 10-bit 3.3 V to 1.8 V level translating bus switch with one output
enable (OE) input. When OE is LOW, the switch is closed and port A is connected to the B
port. When OE is HIGH, the switch is disabled.
To ensure the high-impedance OFF-state during power-up or power-down, OE should be
tied to the VCC through a pull-up resistor. The minimum value of the resistor is determined
by the current-sinking capability of the driver.
Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall
times across the entire VCC range from 3.0 V to 3.6 V.
This device is fully specified for partial power-down applications using IOFF.
2. Features and benefits
ï® Supply voltage range from 3.0 V to 3.6 V
ï® High noise immunity
ï® Complies with JEDEC standard:
ïµ JESD8-B/JESD36 (3.0 V to 3.6 V)
ï® ESD protection:
ïµ HBM JESD22-A114F exceeds 2000 V
ïµ CDM AEC-Q100-011 revision B exceeds 1000 V
ï® 4 ï switch connection between two ports
ï® 3.3 V to 1.8 V level translation
ï® CMOS low power consumption
ï® Latch-up performance exceeds 250 mA per JESD78B Class I level A
ï® IOFF circuitry provides partial Power-down mode operation
ï® Multiple package options
ï® Specified from ï40 ï°C to +85 ï°C and ï40 ï°C to +125 ï°C
|
▷ |