PI3HDMI301 Datasheet, PDF (8/16 Pages) Pericom Semiconductor Corporation – 3:1 Active Switch for HDMI Signals with Optimized Equalization for Enhanced Signal Integrity

ADVANCE INFORMATION - COMPANY CONFIDENTIAL
PI3HDMI301
3:1 Active Switch for HDMI™ Signals with
Optimized Equalization for Enhanced Signal Integrity
TMDS Compliance Test Results
Item
HDMI^TM 1.3 Spec
Pericom Product Spec
Operating Conditions
Termination Supply Voltage, V_DD
3.3V ≤ 5%
3.30 ± 5%
Terminal Resistance
50-ohm ± 10%
45 to 55-ohm
Source DC Characteristics at TP1
Single-ended high level output voltage, VH
V_DD ± 10mV
V_DD ±10mV
Single-ended low level output voltage, VL
( V_DD - 600mV) ≤ VL ≤ ( V_DD - 400mV)
( V_DD - 600mV) ≤ VL ≤ ( V_DD -
400mV)
Single-ended output swing voltage, Vswing
400mV ≤ Vswing ≤ 600mV
400mV ≤ Vswing ≤ 600mV
Single-ended standby (off) output voltage, Voff V_DD ± 10mV
Transmitter AC Characteristics at TP1
V_DD ± 10mV
Risetime/Falltime (20%-80%)
75ps ≤ Risetime/Falltime ≤ 0.4 Tbit
(75ps ≤ tr/tf ≤ 242ps) @ 1.65 Gbps
240ps
Intra-Pair Skew at Transmitter Connector, max
0.15 Tbit
(90.9ps @ 1.65 Gbps)
60ps max
Inter-Pair Skew at Transmitter Connector, max
0.2 Tpixel
(1.2ns @ 1.65 Gbps)
100ps max
Clock Jitter, max
0.25 Tbit
(151.5ps @ 1.65 Gbps)
82ps max
Sink Operating DC Characteristics at TP2
Input Differential Voltage Level, Vdiff
150 ≤ Vdiff ≤ 1200mV
Input Common Mode Voltage Level, VICM
( V_DD - 300mV) ≤ Vicm ≤
( V_DD-37.5mV)
Or
V_DD ±10%
Sink DC Characteristics When Source Disabled or Disconnected at TP2
150mV ≤ VDIFF ≤ 1200mV
( V_DD - 300mV) ≤ Vicm ≤
( V_DD-37.5mV)
Or
V_DD ±10%
Differential Voltage Level
V_DD ± 10mV
V_DD ±10mV
09-0054
8
All trademarks are property of their respective owners.
PS8959B
10/01/09