PI3HDMI1310-A Datasheet, PDF (7/8 Pages) Pericom Semiconductor Corporation – HDMI Switch with non-blocking EQ Circuitry

PI3HDMI1310-A
HDMI™ Switch with non-blocking EQ Circuitry
Switching Characteristics (TA= -40º to +85ºC, VDD = 3.3V±10%)
Parameter
Description
tPZH, tPZL
tPHZ, tPLZ
tb-b
tch-ch
Line Enable Time
Line Disable Time
Bit-to-bit skew within the same differential pair
Channel-to-channel skew
Test Circuit for Electrical Characteristics^(1-5)
V_DD
Min.
0.5
0.5
Max.
25
25
15
35
Units
ns
ps
6.0V
Pulse
V_IN
Generator
R_T
D.U.T
V_OUT
200-ohm
4pF
C_L
200-ohm
Notes:
1. C_L = Load capacitance: includes jig and probe capacitance.
2. R_T = Termination resistance: should be equal to Z_OUT of the Pulse Generator
3. Output 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
output 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
4. All input impulses are supplied by generators having the following characteristics: PRR ≤ MHz, Z_O = 50Ω, t_R ≤ 2.5ns, t_F ≤ 2.5ns.
5. The outputs are measured one at a time with one transition per measurement.
Switch Positions
Test
t_PLZ, t_PZL (output on B-side)
t_PHZ, t_PZH (output on B-side)
Prop Delay
Switch
6.0V
GND
Open
12-0196
7
www.pericom.com 01/25/13