PI2PCIE412-D Datasheet, PDF (5/9 Pages) Pericom Semiconductor Corporation – Enhanced, 1.8V, PCI Express Compliant, 4-Differential Channel, 2:1 Mux/DeMux Switch, w/ Single Enable

PI2PCIE412-D
Enhanced, 1.8V, PCI Express Compliant,
4-Differential Channel, 2:1 Mux/DeMux Switch
Switching Characteristics (TA= -40º to +85ºC, VCC = 1.8V±10%)
Paramenter
Description
tPZH, tPZL Line Enable Time - SEL to AN, BN
tPHZ, tPLZ Line Disable Time - SEL to AN, BN
tb-b
Bit-to-bit skew within the same differential pair
tch-ch
Channel-to-channel skew
Test Circuit for Electrical Characteristics^(1-5)
V_CC
Pulse
V_IN
Generator
R_T
D.U.T
V_OUT
Min.
0.5
0.5
Max.
8.0
4.0
10
35
Units
ns
ps
ps
2 x V_CC
200-ohm
4pF
C_L
200-ohm
Notes:
1. C_L = Load capacitance: includes jig and probe capacitance.
2. R_T = Termination resistance: should be equal to Z_OUT of the Pulse Generator
3. Output 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
output 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
4. All input impulses are supplied by generators having the following characteristics: PRR ≤ MHz, Z_O = 50Ω, t_R ≤ 2.5ns, t_F ≤ 2.5ns.
5. The outputs are measured one at a time with one transition per measurement.
Switching Waveforms
���
����
��������
����
��������
�_����
����
�_{�����}
����
�_{�����}
�_����
�_{���}�������
�_{���}�������
�_��
���
����
���
���
����
Switch Positions
Test
t_PLZ, t_PZL (output on B-side)
t_PHZ, t_PZH (output on B-side)
Prop Delay
Voltage Waveforms Enable and Disable Times
Switch
2 x V_CC
GND
Open
5
PS8788B
01/23/06