PI3USB10M Datasheet, PDF (4/6 Pages) Pericom Semiconductor Corporation – 4.2V, Wide Bandwidth, 2-Channel 2:1 Mux/DeMux USB 2.0 Switch w/ Single Select

PI3USB10M
4.2V, Wide Bandwidth, 2-Channel,
2:1 Mux/DeMux USB 2.0 Switch with Single Select
Test Circuit for Dynamic Electrical Characteristics
�������
��
��
��
���
���������
��������
���� ������
Test Circuit for Electrical Characteristics
VCC
Pulse
V_IN
Generator
RT
D.U.T
VOUT
6.0V
200-ohm
10pF
C_L
200-ohm
Notes:
C_L = Load capacitance: includes jig and probe capacitance.
R_T = Termination resistance: should be equal to Z_OUT of the Pulse Generator
Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
All input impulses are supplied by generators having the following characteristics: PRR ≤ MHz, Z_O = 50Ω, t_R ≤ 2.5ns, t_F ≤ 2.5ns.
The outputs are measured one at a time with on transition per measurement.
Switch Positions
Test
t_PLZ, t_PZL (output on I-side)
t_PHZ, t_PZH (output on I-side)
Prop Delay
Switch
6.0V
GND
Open
06-0014
4
PS8799B
03/16/06