PI3EQX6741ST Datasheet, PDF (4/9 Pages) Pericom Semiconductor Corporation – 3.3V, 1-port, SATA Gen 3i ReDriver with Adjustable Equalization/Pre-Emphasis

PI3EQX6741ST
3.3V, 1-Port, SATA3i ReDriver™
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature.................................................–65°C to +150°C
Supply Voltage to Ground Potential......................... –0.5V to +4.6V
DC SIG Voltage.................................................. –0.5V to V_DD +0.5V
Output Current ...................................................... -25mA to +25mA
Power Dissipation Continuous.............................................. 500mW
Operating Temperature............................................. -40°C to +85°C
Note:
Stresses greater than those listed under MAXIMUM RAT-
INGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at
these or any other conditions above those indicated in the
operational sections of this specification is not implied. Ex-
posure to absolute maximum rating conditions for extended
periods may affect reliability.
ESD, Human Body Model...............................................-8kV to 8kV
AC/DC Electrical Characteristics
Symbol
Parameter
Conditions
Min. Typ.⁽¹⁾ Max. Units
VDD
Power Supply Voltage
3.0
3.6
V
PSTANDBY
Supply Power, Standby
EN = 0
0.07 0.7
PUNPLUG
PSLUMBER
Supply Power, HDD unplugged
Supply Power, Slumber
No HDD attached, TDet_EN = High
TDet_EN = Low
3.6 11
36
50
mW
PACTIVE
Supply Power, Active
EN = 1 A/B_EM=0
DIFFP-P ≥ VTH-SD
254 317
IDD-STANDBY Supply Current Standby
EN = 0
0.02 0.2
IDD-UNPLUG Supply Current, HDD unplugged No HDD attached, TDet_EN = High
1
3
IDD-SLUMBER Supply Current Slumber
TDet_EN = Low
11
14
mA
I_DD-ACTIVE
Supply Current Active
EN = 1, input = 600mVppd,
A/B_EM=0
77
88
tPD
Latency
From input to output
0.7
ns
CML Receiver Input
ZRX-DC
DC Input Impedance
40
50
60
Z_RX-DIFF-DC
DC Differential Input
Impedance
80
100 120
VRX-DIFFp-p
Differential Input Peak-to-peak
Voltage
0.2
1.2
VRX-CM-ACP
VTH-SD
AC Peak Common Mode Input
Voltage
Signal detect Threshold
EN = 1
150
50
200⁽²⁾
Note:
1. Typical values are at VDD = 3.3V, TA = 25°C ambient and maximum loading.
2. Using Compliance test at 1.5Gbps, 3Gbps and 6Gbps. Also using OOB (OOB is formed by ALIGNp primitive or D24.3) test patterns at 1.5Gbps.
The ALIGN primitive (K28.5+D10.2+D27.3 = 0011111010+0101010101+0010011100). The D24.3 = 00110011001100110011.
Ohm
V
mV
mVppd
All trademarks are property of their respective owners.
16-0050
4
www.pericom.com 03/11/16