PI3EQX501B Datasheet, PDF (4/7 Pages) Pericom Semiconductor Corporation – 5.0Gbps, 1-channel, USB3.0 ReDriver

PI3EQX501B
5.0Gbps, 1-Channel, USB3.0 ReDriver™
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Storage Temperature......................................................... –65°C to +150°C
Supply Voltage to Ground Potential.................................... –0.5V to +4.6V
DC SIG Voltage...........................................................–0.5V to V_DD +0.5V
Current Output ................................................................ –25mA to +25mA
Power Dissipation Continuous............................................................ 1.0W
Operating Temperature........................................................-40°C to +85°C
ESD, Human Body Model......................................................–8kv to +8kV
ESD, Machine Model........................................................–200V to +200V
Note:
Stresses greater than those listed under MAXI-
MUM RATINGS may cause permanent damage to
the device. This is a stress rating only and func-
tional operation of the device at these or any other
conditions above those indicated in the opera-
tional sections of this specification is not implied.
Exposure to absolute maximum rating conditions
for extended periods may affect reliability.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
DEVICE PARAMETERS
maximum date rate
t_ENB
t_DIS
CONTROL LOGIC
Slumber mode exist time
Slumber mode entry time
I_IH
Input High Current
I_IL
Input LOW Current
Tri-level Control Pins(Pins: 5, 8)
V_IH
Input High Voltage
V_IL
Input Low Voltage
LVCMOS Control Pins (Pin: 4)
V_IH
Input High Voltage
V_IL
Input Low Voltage
AC/DC Electrical Characteristics
3.3V Power Supply Characteristics
Conditions
LFPS signal
Electrical idle
Min. Typ. Max. Units
5
20
1.3
Gbps
ns
ms
50
uA
-50
0.8Vdd
V
0.2Vdd
0.65Vdd
V
0.35Vdd
Symbol
V_DD
P_SLUMBER33
P_{DEVICE_UNPLUG}
Parameter
Power Supply Voltage
Supply Power Slumber
Supply Power Device Unplug
P_ACTIVE33
Supply Power Active
I_DD-SLUMBER33
Supply Current Slumber
I_{DD-DEVICE_UNPLUG} Supply Current Device Unplug
I_DD-ACTIVE33
Supply Current Active
15-0046
Conditions
Min. Typ. Max. Units
TRI=0
3.0
3.6
V
Device Plugged, No Input Signal
28 35
TRI = 0, Device Unplugged, No Input
Signal
7.3
mW
V_RX-DIFF-P ≥ V_TH-SD, DE=1, Device
Plugged
192
TRI=0, Device Plugged, No Input
Signal
8.3 9.5
TRI = 0, Device Unplugged, No Input
Signal
2.2
mA
V_RX-DIFF-P ≥ V_TH-SD, DE=1, Device
Plugged
58 67
4
www.pericom.com 04/08/15