English
Language : 

PT7C4337A Datasheet, PDF (3/25 Pages) Pericom Semiconductor Corporation – Real-time Clock Module
PT7C4337A/4337AC
Real-time Clock Module (I2C Bus)
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Maximum Ratings
Storage Temperature ............................................................ -65℃ to +150℃
Ambient Temperature with Power Applied ........................... -40℃ to +85℃
Supply Voltage to Ground Potential (VCC to GND) ............... -0.3V to +6.5V
DC Input (All Other Inputs except Vcc & GND)...................................... -0.3V to (Vcc +0.3V)
DC Output Voltage (SDA, /INTA, /INTB pins)........................................-0.3V to +6.5V
DC Output Current (FOUT) ............................................... -0.3V to (Vcc +0.3V)
Power Dissipation .............................................320mW(depend on package)
Note:
Stresses greater than those listed under
MAXIMUM RATINGS may cause permanent
damage to the device. This is a stress rating
only and functional operation of the device at
these or any other conditions above those
indicated in the operational sections of this
specification is not implied. Exposure to
absolute maximum rating conditions for
extended periods may affect reliability.
Operating Mode
The amount of current consumed by the PT7C4337A is determined, in part, by the I2C interface and oscillator operation. The
following table shows the relationship between the operating mode and the corresponding ICC parameter.
Operating Mode
I2C Interface Active
I2C Interface Inactive
I2C Interface Inactive
I2C Interface Inactive, Oscillator Disabled
VCC
1.8V ≤ VCC ≤ 5.5V
1.8V ≤ VCC ≤ 5.5V
1.2V ≤ VCC ≤ 1.8V
1.2V ≤ VCC ≤ 1.8V
Power
ICC Active (ICCA)
ICC Standby (ICCS)
Timekeeping (ICCTOSC)
Data Retention (ICCTDDR)
Recommended Operating Conditions
Part No.
Sym.
Description
PT7C4337A
PT7C4337AC
VCC
VCCT
VOSC
VIH
VIL
TA
VCC supply voltage
Oscillator start up voltage
Input high level
Input low level
Operating temperature
SCL, SDA
INTA, SQW/INTB
Min
1.8
1.2
1.2
0.7VCC
-
-0.3
-40
Type
3.3
-
-
-
-
-
-
Max Unit
5.5
1.8
5.5
V
VCC+0.3
5.5
0.3VCC
85
ºC
DC Electrical Characteristics
Unless otherwise specified, VCC = 1.8~5.5V, TA = -40 °C to +85 °C
Sym.
Item
Pin
Condition
VCC
VCCT
VOSC
VIL1
VIH1
VIL2
VIH2
IOL
IIL
IOZ
Supply voltage
Oscillator voltage
Low-level input voltage
High-level input voltage
Low-level input voltage
High-level input voltage
Low-level output current
Input leakage current
Output current when OFF
VCC
VCC
SCL
SCL
X1
X1
SDA, /INTA, /INTB
SCL
SDA, /INTA, /INTB
Full operation
Timekeeping (Note 5)
VOL = 0.4V
Min Typ Max Unit
1.8
-
5.5 V
1.2
-
1.8
1.2
-
5.5 V
-0.3
- 0.3VCC V
0.7VCC - VCC+0.3
- 0.53 -
V
- 0.53 -
3
-
- mA
-1
-
1 A
-1
-
1 A
2014-10-0002
PT0480-2 11/03/14
3