 English |
|
|
|
|
|
|
|
| PI3CH480 Datasheet, PDF (3/8 Pages) Pericom Semiconductor Corporation – Low Voltage, High-Bandwidth, 4-Channel 2:1 Mux/Demux, NanoSwitch | |||
| |||
| ◁ |
PI3CH480
Low Voltage, High-Bandwidth, 4-Channel
2:1 Mux/Demux, NanoSwitchâ¢
Capacitance (TA = 25°C f = 1 MHz)
Parameters(5)
Description
Test Conditions
Typ.
CIN
COFF(IN)
COFF(Y)
CON
Input Capacitance
In Capacitance, Switch Off
Y Capacitance, Switch Off
Y/In Capacitance, Switch On
3.0
3.5
VIN = 0V
7.0
10.0
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3V, TA = 25°C ambient and maximum loading.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. Measured by the voltage drop between Y and In pin at indicated current through the switch. ON resistance is determined
by the lower of the voltages on the two (Y, In) pins.
5. This parameter is determined by device characterization but is not production tested.
Units
pF
Power Supply Characteristics
Parameters
Description
Test Conditions(1)
Min. Typ.(2)
ICC
Quiescent Power Supply Current
VCC = 3.6V, VIN = GND or VCC
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at VCC = 3.3V, +25°C ambient.
Max.
0.8
Units
mA
3
PS8728A
04/23/04
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese