PI3CH480 Datasheet, PDF (2/8 Pages) Pericom Semiconductor Corporation – Low Voltage, High-Bandwidth, 4-Channel 2:1 Mux/Demux, NanoSwitch

PI3CH480
Low Voltage, High-Bandwidth, 4-Channel
2:1 Mux/Demux, NanoSwitch™
Maximum Ratings
(Above which the useful life may be impaired. For user guidelines, not tested.)
Storage Temperature ................................................ –65°C to +150°C
Ambient Temperature with Power Applied ............... –40°C to +85°C
Supply Voltage to Ground Potential ........................... –0.5V to +4.6V
DC Input Voltage ........................................................ –0.5V to +6.0V
DC Output Current................................................................... 120mA
Power Dissipation ....................................................................... 0.5W
Note:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these
or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect re-
liability.
DC Electrical Characteristics, 3.3V Supply (Over Operating Range, T_A = –40°C to +85°C, V_CC = 3.3V ± 10%)
Parameters
Description
Test Conditions⁽¹⁾
Min. Typ⁽²⁾ Max.
V_IH
Input HIGH Voltage
Guaranteed Logic HIGH Level
2.0
V_IL
Input LOW Voltage
Guaranteed Logic LOW Level
–0.5
0.8
V_IK
Clamp Diode Voltage
V_CC = Min., I_IN = –18 mA
-1.3 –1.8
I_IH
Input HIGH Current
V_CC = Max., V_IN = V_CC
±1
I_IL
Input LOW Current
V_CC = Max., V_IN = GND
±1
I_OZH
High Impedance Output Current 0 ≤ Y, IN ≤ V_CC
±1
V_CC = Min., V_IN = 0.0V,
R_ON
Switch On Resistance⁽⁴⁾
I_ON = 48 mA or -64mA
V_CC = Min., V_IN = 3.6V, I_ON = -15 mA
4
6
5
8
Units
V
µA
Ω
DC Electrical Characteristics, 2.5V Supply (Over Operating Range, T_A = –40°C to +85°C, V_CC = 2.5V ± 10%)
Parameters⁽⁵⁾
Description
Test Conditions
Min. Typ.
Max.
Units
V_IH
Input HIGH Voltage
Guaranteed Logic HIGH Level
1.8
– V_CC + 0.3
V_IL
Inout LOW Voltage
Guaranteed Logic LOW Level
–0.3 –
0.8
V
V_IK
Clamp Diode Voltage
V_CC = Max., I_IN = –6mA
– –0.7
–1.8
I_IH
Input HIGH Current
V_CC = Max., V_IN = V_CC
–
–
±1
IIL
I_OZH
Input LOW Current
High Impedance Current⁽³⁾
V_CC = Max., V_IN = GND
0 ≤ Y, In ≤ V_CC
–
–
±1
µA
–
–
±1
V_CC = Min., V_IN =0.0V,
R_ON
Switch On Resistance⁽⁴⁾
I_ON = –48mA
V_CC = Min., V_IN = 2.25V,
I_ON = -15mA
–
6
8
Ω
–
7
14
2
PS8728A
04/23/04