PI3CH360 Datasheet, PDF (3/9 Pages) Pericom Semiconductor Corporation – Low Voltage, High-Bandwidth, 3-Channel 2:1 Mux/DeMux, NanoSwitch

PI3CH360
Low Voltage, High-Bandwidth, 3-Channel, 2:1
Mux/DeMux, NanoSwitch^™
Capacitance (T_A = 25°C f = 1 MHz)
Parameters⁽⁵⁾
Description
Test Conditions
Typ.
C_IN
Input Capacitance
3.0
C_OFF(IN)
C_OFF(Y)
In Capacitance, Switch Off
Y Capacitance, Switch Off
3.5
V_IN = 0V
7.0
C_ON
Y/In Capacitance, Switch On
10.0
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at V_CC = 3.3V, T_A = 25°C ambient and maximum loading.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. Measured by the voltage drop between Y and In pin at indicated current through the switch. ON resistance is determined
by the lower of the voltages on the two (Y, In) pins.
5. This parameter is determined by device characterization but is not production tested.
Units
pF
Power Supply Characteristics
Parameters
Description
I_CC
Quiescent Power Supply Current
Test Conditions⁽¹⁾
V_CC = 3.6V, V_IN = GND or V_CC
Min. Typ.⁽²⁾ Max.
0.8
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at V_CC = 3.3V, +25°C ambient.
Units
mA
3
PS8727A
07/07/04