PI3CH360 Datasheet, PDF (1/9 Pages) Pericom Semiconductor Corporation – Low Voltage, High-Bandwidth, 3-Channel 2:1 Mux/DeMux, NanoSwitch

PI3CH360
Low Voltage, High-Bandwidth, 3-Channel
2:1 Mux/DeMux, NanoSwitch^™
Features
• Near-Zero propagation delay
• 5Ω switches connect inputs to outputs
• High signal passing bandwidth (500 MHz)
• Beyond Rail-to-Rail switching
• 5V I/O tolerant with 3.3V supply in OFF and ON state
• 2.5V and 3.3V supply voltage operation
• Hot Insertion Capable
• Industrial Operating Temperature: -40ºC to +85ºC
• 2KV ESD Protection (Human Body Model)
• Latch-up Performance > 250mA per JESD17
• Packaging (Pb-free & Green available):
– 16-pin 150-mil wide plastic QSOP (Q)
– 16-pin 173-mil wide plastic TSSOP (L)
– 20-Contact TQFN (ZH)
Block Diagram
IA0 IA1 IB0 IB1 IC0 IC1
EN
S
YA
YB
YC
Pin Description
Pin Name
Description
IAN to ICN
Data Inputs
S
Select Inputs
EN
Enable
YA to YC
Data Outputs
GND
Ground
V_CC
Power
Description
Pericom Semiconductor’s PI3CH series of switch circuits are
produced using the Company’s advanced sub-micron CMOS
technology, achieving industry leading performance.
The PI3CH360 is a 3-Channel, 2:1 Multiplexer/Demultiplexer with
3-state outputs. The switch introduces no additional ground bounce
noise or propagation delay.
The PI3CH360 device is very useful in switching signals that have
high bandwidth (500MHz).
Pin Configuration
�
����
����
��
��
��
����
���
�
��
�
��
�
��
� ������ ��
� ^{����} ��
�
��
�
��
�
�
���
��
���
���
���
���
���
���
�^�
� ��
��� ��
�� ^�
�� ��
�� ^�
�� ���
����������
�� ^�
�� ^{�� ���}
�� ^�
�� _{���}
�� ^�
�� _{���}
�� ^�
�� _{���}
��� ^� _{�� ��} ^{�� ���}
Notes:
1. N.C. = No internal connection
Truth Table⁽¹⁾
EN S YA YB
H X Hi-Z Hi-Z
L L IA0 IB0
L H IA1 IB1
Notes:
1. H=High Voltage Level
L=Low Voltage Level
YC
Hi-Z
IC0
IC1
Function
Disable
S=0
S=1
1
PS8727A
07/07/04