English
Language : 

PI3A3160 Datasheet, PDF (2/8 Pages) Pericom Semiconductor Corporation – 3.0V, SOTiny™ 0.4Ω Dual SPDT Analog Switch
◁
PI3A3160
3.0V, SOTiny™ 0.4Ω
Dual SPDT Analog Switch
Absolute Maximum Ratings
Voltages Referenced to GND
VCC .................................................................... –0.5V to +3.6V
VIN, VCOM, VNC, VNO (1)............................–0.5V to V+ +0.3V
or 30mA, whichever occurs first
Current (any terminal)................................................... ±200mA
Peak Current, COM, NO, NC
(Pulsed at 1ms, 10% duty cycle)................................... ±400mA
Thermal Information
Continuous Power Dissipation
SOT23 (derate 7.1mW/ºC above +70ºC)............................ 0.5W
Storage Temperature ........................................ –65ºC to +150ºC
Lead Temperature (soldering, 10s) ................................. +300ºC
Note 1: Signals on NC, NO, COM, or IN exceeding VCC or GND are clamped by internal diodes. Limit forward diode current to 30mA.
Caution: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a
stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of
this specification is not implied.
Electrical Specifications - Single +3.3V Supply
(VCC = +3.3V ± 10%, GND = 0V, VIH = 1.4V, VIL = 0.5V)
Parameter
Symbol
Conditions
Analog Switch
Analog Signal Range (3)
VANALOG
On Resistance
On-Resistance Match
Between Channels(4)
RON
∆RON
VCC = 2.7V,
ICOM = 100mA,
VNO or VNC = +1.5V
On-Resistance Flatness(5)
NO or NC Off Leakage
Current(6)
COM On Leakage Cur-
rent(6)
RFLAT(ON)
INO(OFF) or
INC(OFF)
ICOM(ON)
VCC = 2.7V,
ICOM = 100mA,
VNO or VNC = 0.8V, 2.0V
VCC = 3.3V,
VCOM = 0V,
VNO or VNC = +2.0V
VCC = 3.3V,
VCOM = +2.0V,
VNO or VNC = +2.0V
Temp. (°C) Min.(1) Typ. (2) Max. (1) Units
Full
0
VCC
V
25
0.4
0.45
Full
0.6
25
0.08
Full
0.09
Ω
25
0.1
Full
0.1
25
-100
100
Full
-400
25
-200
400
nA
200
Full
-400
400
PS8711D
07/21/04
2
 ▷