|
PI3A3160 Datasheet, PDF (1/8 Pages) Pericom Semiconductor Corporation – 3.0V, SOTiny™ 0.4Ω Dual SPDT Analog Switch | |||
|
PI3A3160
3.0V, SOTiny⢠0.4â¦
Dual SPDT Analog Switch
Features
⢠CMOS Technology for Bus and Analog Applications
⢠Low On-Resistance: 0.4⦠(+2.7V Supply)
⢠Wide VCC Range: +1.5V to +3.6V
⢠Low Power Consumption : 5µW
⢠Rail-to-Rail switching throughout Signal Range
⢠Fast Switching Speed: 20ns max. at 3.3V
⢠High Off Isolation: â27dB at 100 KHz
⢠â41dB (100 KHz) Crosstalk Rejection Reduces
Signal Distortion
⢠Extended Industrial Temperature Range: â40°C to 85°C
⢠Packaging:
â Pb-free & Green, 12-pin TDFN (ZG)
â Pb-free & Green, 12-pin TDFN (ZE)
Applications
⢠Cell Phones
⢠PDAs
⢠Portable Instrumentation
⢠Battery Powered Communications
⢠Computer Peripherals
Description
The PI3A3160 is a fast Dual single-pole double-throw (SPDT)
CMOS switch. It can be used as an analog switch or as a low-
delay bus switch. Specified over a wide operating power supply
voltage range, +1.5V to +3.6V, the switch has an On-Resistance
of 0.4⦠at 3.0V.
Control inputs, IN, tolerates input drive signals up to 3.3V, inde-
pendent of supply voltage.
PI3A3160 is a lower voltage and On-Resistance replacement for
the PI5A3158.
Block Diagram / Pin Configuration
COM0 1
12 VCCo
NC0 2
11 NO0
GND 3
10 IN0
Pin Description
Pin Number Name
Description
8, 11
NOx Data Port (Normally Open)
3, 6
GND Ground
2, 5
NCx Data Port (Normally Closed)
1, 4
9, 12
7, 10
COMx
VCCx
INx
Common Output/Data Port
Postive Power Supply(2)
Logic Control
Notes:
1. x = 0 or 1
2. VCC0 ad VCC1 are not internally connected. Each must be powered
seperately.
COM1 4
NC1 5
GND 6
Function Table
Logic Input
0
1
9 VCC1
8 NO1
7 IN1
Function
NCx Connected to COMx
NOx Connected to COMx
PS8711D
07/21/04
1
|
▷ |