PI3USB411 Datasheet, PDF (14/16 Pages) Pericom Semiconductor Corporation – 3.3V, USB 2.0 High-Speed Signal Switch w/ Low THD Channels for Audio Signals

PI3USB411
3.3V, USB 2.0 High-Speed Signal Switch
with Low THD Channels for Audio Signals
Figure 18: High Fidelity Audio Signal Test Setup.
In Figure 18, the test flow is to send a sine wave signal from 30Hz to 30KHz from the Function Generator (HP8116A) to the
Pericom Test Board. Pericom took measurements on three test points using a Tektronix Scope (TDS694C). The three test
points were TP2 (Channel 1 on Scope), TP3 (Channel 2 on Scope), and TP4 (Channel 3 on Scope). R1 represents the termina-
Figure 19: See Figure 18 for test setup. R1=12K and the sine wave on the left plot is 30kHz, while the sine wave on the right is
30Hz. Channel 1 (black)=TP2, Channel 2 (green)=TP3, Channel 3(red)=TP4
06-0078
14
PS8817A
06/06/06