PI3HDMI101-B Datasheet, PDF (10/16 Pages) Pericom Semiconductor Corporation – 1:1 Active HDMI ReDriver with Optimized Equalization & I2C Buffer and RxTerm detection circuitry

PI3HDMI101-B
1:1 Active HDMITM ReDriver™ with Optimized Equalization
& I2C Buffer and RxTerm detection circuitry
Electrical Characteristics (Cont..)
Symbol Parameter
C_IO
Input/output capacitance
V_OH(TTL)¹ TTL High-level output voltage
V_OL(TTL) ¹ TTL Low-level output voltage
Note:
1. Voh/Vol of external driver at the R and T ports.
Test Conditions
V_I = 5.0 V or 0 V, Freq = 100kHz
V_I = 3.0 V or 0 V, Freq = 100kHz
I_OH = -8 mA
I_OL = 8 mA
Min.
2.4
Typ.⁽¹⁾ Max.
25
10
Units
pF
V
0.4 V
I²C Pins (SCL_R, SDA_R) (R Port)
I_ikg
Input leakage current
I_OH
High-level output current
I_IL
Low-level input current
V_OL
Low-level output voltage
C_I
Input capacitance
V_I = 5.5 V
-50
V_I = V_DD
-20
V_O = 3.6 V
-10
V_IL = GND
-10
I_OL = 4 mA, I_ADJ = H
V_I = 5.0 V or 0 V, Freq = 100kHz
V_I = 3.0 V or 0 V, Freq = 100kHz
50
µA
20
10
µA
10
µA
0.2 V
25
pF
10
Switching Characteristics (over recommended operating conditions unless otherwise noted)
Symbol Parameter
Test Conditions
Min. Typ.⁽¹⁾ Max. Units
TMDS Differential Pins
tpd
Propagation delay
2000
t_r
Differential output signal rise time (20%
- 80%)
75
240
t_f
Differential output signal fall time (20%
- 80%)
V_DD = 3.3V, R_T = 50-Ohm,
pre-emphasis/de-emphasis = 0dB
75
240
t_sk(p)
t_sk(D)
t_sk(o)
t_jit(pp)
t_jit(pp)
Pulse skew
Intra-pair differential skew
Inter-pair differential skew⁽²⁾
Peak-to-peak output jitter from TMDS
clock channel
Peak-to-peak output jitter from
TMDS data channel
pre-emphasis/de-emphasis = 0dB,
Data Inputs = 1.65 Gbps HDMI data
pattern
CLK input = 165 MHz clock
10
50
23
50
100 ^ps
15
30
18
50
t_DE De-emphasis duration
de-emphasis = -3.5dB, Data Inputs =
250 Mbps HDMI data pattern,
240
CLK output = 25 MHz clock
(Table Continued)
All trademarks are property of their respective owners.
13-0005
10
PS8956B
03/06/13