|
PI3WVR12412 Datasheet, PDF (1/13 Pages) Pericom Semiconductor Corporation – HDMI 2.0, DisplayPort 1.2 Video Switch | |||
|
PI3WVR12412
HDMI 2.0, DisplayPort 1.2 Video Switch
Features
ÃÃ4-lane, 1:2 mux/demux that will support RBR, HBR1, or
HBR2
ÃÃData rate: 3.4 Gbps to 6.0 Gbps for high data channels
ÃÃSupports DDC with HPD channel mux/demux @ HDMI
ÃÃSupports 720 Mbps high-speed DP AUX @ DP
ÃÃ-1.7 dB Insertion Loss for Dx channels @ 3.0 GHz
ÃÃ-3 dB Bandwidth for Dx channels: 4.8 GHz
ÃÃReturn loss for Dx channels @ 3.0 GHz: -16 dB
ÃÃLow Crosstalk for high speed channels: -25 dB@6.0 Gbps
ÃÃLow Off Isolation for high speed channels: -22dB@6.0 Gbps
ÃÃLow channel-to-channel skew, 35ps max
ÃÃLow Bit-to-Bit Skew, 5ps typ (between '+' and '-' bits)
ÃÃVDD Operating Range: 3.3V +/-10%
ÃÃESD Tolerance: 2kV HBM
ÃÃPackaging (Pb-free & Green): 42 TQFN (ZHE)
Block Diagram
D0+
D0 -
D1+
D1 -
D2+
D2-
D3+
D3-
SCL/ AUX+
SDA/ AUX-
HPD
Description
Pericom Semiconductorâs PI3WVR12412 is a multi-standard vid-
eo switch with wide voltage range capability. It supports HDMI
2.0, DisplayPort 1.2, and emerging and proprietary standard.
PI3WVR12412 can pass high-speed signals up to 1.2 V peak-to-
peak differential with a common-mode voltage from 0 to 3.4V for
TMDS signal.
The wide voltage range allow DC-coupled multi-standard opera-
tion. Eliminating AC coupling capacitors saves board space and
improves signal integrity for dense PCB design. The high speed
channels can also pass 0V-3.3V CMOS signals up to 1MHz.
In addition to four high-speed lanes, PI3WVR12412 also switch-
es the DDC and HPD signals or AUX and HPD signals using the
DDC/ AUX and HPD channel mux/demux.
Application
ÃÃRouting of HDMI 2.0 video signals with low signal
attenuation between source and sink for 4K2K ultra high
definition video display and broadcast video equipment.
ÃÃRouting of DisplayPort video signals with low signal
attenuation between source and sink for PC and monitor.
D0+A
D0-A
D1+A
D1-A
D2+A
D2-A
D3+A
D3-A
D0+B
D0-B
D1+B
D1-B
D2+B
D2-B
D3+B
D3-B
SCL A/ AUX+ A
SDA A/ AUX- A
HPD A
SCL B/ AUX+ B
SDA B/ AUX- B
HPD B
GPU_SEL
DDC/ AUX_HPD_SEL
OE
Logic
Control
14-0056
1
www.pericom.com 04/29/14
|
▷ |