PE94302_07 Datasheet, PDF (4/6 Pages) Peregrine Semiconductor Corp. – 50 ohm RF Digital Step Attenuator For Rad-Hard Space Applications 6-bit, 31.5 dB, DC - 4.0 GHz

Figure 4. Serial Interface Timing Diagram
LE
Clock
Data
MSB
t_SDSUP
t_SDHLD
LSB
t_LESUP
t_LEPW
PE94302
Advance Information
Table 6. 6-Bit Attenuator Serial Programming
Register Map
B5
B4
B3
B2
B1
B0
C16
C8
C4
C2
C1
C0.5
↑
MSB (first in)
↑
LSB (last in)
Figure 5. Parallel Interface Timing Diagram
LE
Parallel Data
C16:C0.5
t_PDSUP
t_LEPW
t_PDHLD
Table 7. Serial Interface AC Characteristics
V_DD = 3.0 V, -40° C < T_A < 85° C, unless otherwise specified
Symbol
Parameter
Min Max Unit
fClk
Serial data clock
frequency (Note 1)
10
MHz
tClkH
Serial clock HIGH time
30
ns
tClkL
Serial clock LOW time
30
ns
tLESUP
LE set-up time after last
clock falling edge
10
ns
tLEPW
LE minimum pulse width
30
ns
tSDSUP
Serial data set-up time
before clock rising edge
10
ns
tSDHLD
Serial data hold time
after clock falling edge
10
ns
Note:
fClk is verified during the functional pattern test. Serial
programming sections of the functional pattern are clocked at
10 MHz to verify fclk specification.
©2005-2007 Peregrine Semiconductor Corp. All rights reserved.
Page 4 of 6
Table 8. Parallel Interface AC Characteristics
V_DD = 3.0 V, -40° C < T_A < 85° C, unless otherwise specified
Symbol
Parameter
Min Max Unit
tLEPW
LE minimum pulse width
10
ns
tPDSUP
Data set-up time before
rising edge of LE
10
ns
tPDHLD
Data hold time after
falling edge of LE
10
ns
Document No. 70/0186-02 │ UltraCMOS™ RFIC Solutions