L-S115GECT Datasheet, PDF (4/15 Pages) PARA LIGHT ELECTRONICS CO., LTD. – SURFACE MOUNT DEVICE LED

Release by
PARA LIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : L-S115GECT
REV:A / 0
z Bin Code List
Luminous Intensity(IV), Unit:mcd@20mA
Green(a chip)
Orange(b chip)
Bin Code
Min
Max
Bin Code
Min
Max
J
4.5
7.1
H
2.8
4.5
K
7.1
11.2
J
4.5
7.1
L
11.2
18.0
K
7.1
11.2
M
18.0
28.0
L
11.2
18.0
Tolerance of each bin are 15%
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that
proximities the CIE eye-response curve.
2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous
intensity.
3. The dominant wavelength d is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
4. Caution in ESD :
Static Electricity and surge damages the LED. It is recommended use a wrist band or
anti-electrostatic glove when handling the LED. All devices, equipment and machinery
must be properly grounded.
5. Major standard testing equipment by “Instrument System” Model : CAS140B Compact
Array Spectrometer and “KEITHLEY” Source Meter Model : 2400.
DRAWING NO. : DS-78-08-0003
PARA-FOR-068
DATE : 2008-02-21 PAGE 4 of 15