HY Datasheet, PDF (4/4 Pages) Panasonic Battery Group – Non-polarized 1 Form C relay that realizes nominal operating power of 150 mW

DIMENSIONS (mm inch)
CAD Data
HY
The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac
External dimensions
PC board pattern (Bottom view)
7.4
.291
0.5
.020
5.08
.200
12
.462
3.5
.138
0.4 dia.
.016 dia.
0.25
.010
2.54
.100
10.1
.398
0.5
.020
0.25
7.62
.300
.010
(0.82)
(.032)
2.54
.100
7.62
.300
6-1 dia.
6-.039 dia.
5.08
.200
2.54
.100
(0.82)
(.032)
Tolerance: ±0.1 ±.004
Schematic (Bottom view)
General tolerance: ±0.3 ±.012
12
NC
NO
10 9
5
COM
6
NOTE
1. Packing style
1) As shown in the diagram below, the
relays are presented in tube packages
with pins 1 and 10 on the left. Be sure to
maintain relays in the correct orientation
when mounting on PC boards.
Side with pins 1 and 10.
Stopper
(gray)
Stopper
(green)
2. Automatic insertion
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
4.9 N {500gf} or less
Chucking pressure in the direction B:
4.9 N {500gf} or less
Chucking pressure in the direction C:
4.9 N {500gf} or less
A
C
B
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
For general cautions for use,
please refer to the “Cautions for
use of Signal Relays” or “General
Application Guidelines”.
ASCTB212E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e