MN103SJ7 Datasheet, PDF (8/16 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller

MN103SJ7/N0/N1/N2/N4/N5/N6 Series
 Features (continued)
Serial 2 (Full duplex UART / Synchronous serial interface)
Synchronous serial interface
Overrun error detection
Transfer clock source
1/2, 1/4, 1/16 and 1/64 of timer 0 underflow,
1/2, 1/4, 1/16 and 1/64 of timer 1 underflow,
1/2, 1/4, 1/16 and 1/64 of timer 2 underflow,
1/2, 1/4, 1/16 and 1/64 of timer 3 underflow,
IOCLK/2, IOCLK/4, SBT2 pin
Can be selected as the first bit to be transferred, Any transfer size from 2 to 8 bits can be selected.
Continuous transmission, reception and transmission / reception
Maximum transfer rate: 5.0 Mbps
Corresponding to the 4 channel system communication and the SPI communication
Full duplex UART
Parity check, Overrun and flaming error detection
Transfer clock source
1/16, 1/32, 1/64, 1/128, 1/256, 1/512 and 1/1024 of timer 0 underflow,
1/16, 1/32, 1/64, 1/128, 1/256, 1/512 and 1/1024 of timer 1 underflow,
1/16, 1/32, 1/64, 1/128, 1/256, 1/512 and 1/1024 of timer 2 underflow,
1/16, 1/32, 1/64, 1/128, 1/256, 1/512 and 1/1024 of timer 3 underflow,
IOCLK/16, IOCLK/32, IOCLK/64
Can be selected as the first bit to be transferred, Any transfer size from 7 to 8 bits can be selected.
Continuous transmission, reception and transmission / reception
Maximum transfer rate: 300 kbps
 Regulator
Incorporates regulator, and use of 5 V power supply is possible
 Power Supply Detection
Detection level
3.6 V to 4.3 V
When power supply voltage is under detection level, reset is generated.
Ver. DEM
8