MN103SJ7 Datasheet, PDF (6/16 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller

MN103SJ7/N0/N1/N2/N4/N5/N6 Series
 Features (continued)
 Watchdog Timer
Detection time 6.55 ms to 1677.72 ms (oscillation frequency 10 MHz)
Generates non-maskable interrupt at detection
Generates hard-reset at second consective overflow
 A /D Converter
A/D0
Resolution 10 bits
Minimum conversion time 0.5 ms
Analog input 5 channels (AD0IN00 to AD0IN04)
A/D conversion start trigger is in synchronization with complementary 3-phase PWM cycle and 16-bit timer
A/D1
Resolution 10 bits
Minimum conversion time 0.5 ms
Analog input
MN103SFJ7A
: 3 channels (AD1IN00 to AD1IN02)
MN103SFN0/N4 series: 3 channels (AD1IN00 to AD1IN02)
MN103SFN1/N5 series: 7 channels (AD1IN00 to AD1IN06)
MN103SFN2/N6 series: 11 channels (AD1IN00 to AD1IN10)
A/D conversion start trigger is in synchronization with complementary 3-phase PWM cycle and 16-bit timer
 Complementary 3-phase PWM output
Min. resolution: 16.7 ns
Triangular and saw-tooth waves output
Incorporates a dead time insertion circuit
Can overwrite registers by double buffer during PWM operation
PWM output protection circuit supporting external interrupts and non-maskable interrupt
Output timing varying function
A/D conversion start trigger, 16-bit timer start trigger
 VGA
VGA
MN103SFN4 series 1 sets
MN103SFN5/N6 series 2 sets
The gain of eight stages can be set (2.05, 3.03, 4.00, 4.98, 5.96, 7.90, 9.83, and 19.40times)
Offset voltage cancel cansel function(short-circuit or switching)
Ver. DEM
6