EZJPZV6R8GANIL Datasheet, PDF (8/13 Pages) Panasonic Semiconductor – Multilayer Varistors

Multilayer Varistors ,Chip Type
Series : EZJZ ,EZJP(For DC voltage lines, high speed signal lines)
Series : EZJS (For DC voltage lines)
Handling Precautions
Multilayer Varistors
！ _{Safety Precautions}
Multilayer Varistors (hereafter refereed to as “Varistors”) should be used for general purpose applications as
countermeasures against ESD and noise found in consumer electronics (audio/visual, home, office, information &
communication) equipment. When subjected to severe electrical, environmental, and/or mechanical stress beyond the
specifications, as noted in the Ratings and Specified Conditions section, the Varistors may fail in a short circuit mode
or in an open-circuit mode. This case results in a burn-out, smoke or flaming.
For products which require high safety levels, please carefully consider how a single malfunction can affect your
product. In order to ensure the safety in the case of a single malfunction, please design products with fail-safe, such as
setting up protecting circuits, etc.
● For the following applications and conditions, please contact us for additional specifications not found in this
document.
・When your application may have difficulty complying with the safety or handling precautions specified below.
・For any applications where a malfunction with this product may directly or indirectly cause hazardous conditions
which could result in death or injury;
Aircraft and Aerospace Equipment (artificial satellite, rocket, etc.)
Submarine Equipment (submarine repeating equipment, etc.)
Transport Equipment (motor vehicles, airplanes, trains, ship, traffic signal controllers, etc.)
Power Generation Control Equipment (atomic power, hydroelectric power, thermal power plant control system,
etc.)
Medical Equipment (life-support equipment, pacemakers, dialysis controllers, etc.)
Information Processing Equipment (large scale computer system, etc.)
Electric Heating Appliances, Combustion devices (gas fan heaters, oil fan heaters, etc.)
Rotary Motion Equipment
Security Systems
And any similar types of equipment
！ _{Strict Observance}
1. Confirmation of Rated Performance
The Varistors shall be operated within the specified rating/performance.
Application exceeding the specifications may cause deteriorated performance and/or breakdown, resulting in
degradation and/or smoking or ignition of products. The following are strictly observed.
(1) The Varistors shall not be operated beyond the specified operating temperature range.
(2) The Varistors shall not be operated in excess of the specified maximum allowable voltage.
(3) The Varistors shall not be operated in the circuits to which surge current and ESD are applied exceeding the
specified maximum peak current and maximum ESD.
(4) Never use for AC power supply circuits.
2. The Varistors shall not be mounted near inflammables.
■Operating Conditions and Circuit Design
1. Circuit Design
1.1 Operating Temperature and Storage Temperature
The specified “Operating Temperature Range” found
in the Specification is the absolute maximum and
minimum temperature rating. Every Varistor shall be
operated within the specified “Operating
Temperature Range”.
The Varistors mounted on PCB shall be stored
without operating within the specified “Storage
Temperature Range” in the Specifications.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
-8-