MN103L08 Datasheet, PDF (5/8 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller

MN103L08 Series
 Features (continued)
 Real time clock
Calendar function (second, minute, hour, month, year)
Alarm function, Cycle interrupt
Clock source : clksp, clkx
 Buzzer
Output frequency : clksp/2⁹, clksp/2¹⁰, clksp/2¹¹, clksp/2¹², clksp/2¹³, clksp/2¹⁴, clkx/2³, clkx/2⁴
 Serial interface
8 channels
UART/ clock synchronous
: 5 channels
IIC
: 3 channels
Serial 0, 1, 2, 3, 4 (UART/Synchronous serial interface)
UART
Parity check, overrun error/framing error detection
Transfer size can be selected from 7 to 8 bits.
Clock Synchronous
The communication type can be selected from 2-ware or 3-wire.
First tansfer bit can be selected from MSB or LSB
Arbitrary size of 2 to 8 bits are selectable.
Continuous transmission, continuous reception, continuous transmission/reception are available.
Synchronous edge selection of transfer clock.
Maximum transfer rate : 5 MHz
Clock source : Baud rate timer Bn output (n = 0 to 4), external clock
Serial 5, 6, 7 (Multi master IIC)
Multi master IIC
100 kHz/ 400 kHz communication is supported
7-bit, 10-bit slave address is settable
General call communication mode is supported
Clock source : Baud rate timer Bn output (n = 5 to 7), external clock
 HDMI-CEC
HDMI-CEC
Clock source
HDMI Specification Compatible with CEC communication option
: clkx, clkbus
 Remote control reception circuit: 1 unit
Association for Electric Home Appliances format
Clock source
: clkx, clkoscsel
 A/D converter Resolution:
10 bit
Channel
: 16 channels
Clock source
: clkbus/2, clkbus/4, clkbus/8, clkbus/16, clkx × 2
 Auto reset
Auto reset function can be selected ON/OFF
 Power supply voltage detection circuit
Detection voltage can be set 2.2 V to 4.0 V by software　
 Clock monitoring function
Frequency error detection of external / PLL clock.
Hardware reset or non-maskable interrupt generation can be selected by program when a frequency error is detected.
 LED driver: 8 sets
Ver. AEM
5