English
Language : 

MN103L08 Datasheet, PDF (3/8 Pages) Panasonic Semiconductor – 32-bit Single-chip Microcontroller
MN103L08 Series
 Features (continued)
 Internal operation clock (continued)
Low-speed oscillation clock (clkx)
Frequency : 32.768 kHz (Max)
 Bus interface
Bus area
Data bus
: 2 MB × 2 banks
: 8/ 16 bits
 DMA Controller
Transfer area
Channel
Transfer form
Transfer requests
Transfer modes
: Internal ROM space / Internal RAM space / Internal I/O area / External memory space
↔ Internal ROM space / Internal RAM space / Internal I/O area / External memory space
: 4 ch
: 2 bus cycles transfer
: 44 types
External interrupts:4, Timer:19, Serial:15, IIC: 3, A/D converter:1, Remote control:1, Software:1
: 3 modes (One word transfer / Burst transfer / Intermittent transfer)
 Interrupt functions
Internal interrupts
External interrupts
: 71 factors
(Timer:29, Serial I/F:10, IIC:6, Watchdog timer:1, DMA:12, A/D converter:1, Real-time clock: 2,
Remote control: 4, Power Voltage Detection: 2, HDMI-CEC:1, AC zero cross: 2, System error:1)
: 10 factor
(IRQn (n = 0 to 7) : 8, NMIRQ (shares an interrupt factor with IRQ7) : 1, KEY: 1)
 Watchdog Timer
Watchdog Timer
On detection of error, hard reset is done inside the LSI
(Non-maskable interrupt is generated by the first watchdog time-out event, and hard-reset is done by a series of two time-out
events)
Time-out cycle : CPU clock cycle × N (N = 216, 218, 220, 227)
Watchdog Timer2
On detection of error, hard reset is done inside the LSI
(Non-maskable interrupt is generated by the first watchdog time-out event, and hard-reset is done by a series of two time-out
events)
Time-out cycle : Internal low-speed oscillation clock cycle × N (N = 24, 25, 26, 27, 28, 29, 210, 211, 212, 213, 214, 215)
 Timer counter
23 units
General purpose 8-bit timer
8-bit free-run timer
General purpose 16-bit timer
Motor control timer
Baud rate 8-bit timer
× 6 unit
× 1 unit
× 7 unit
× 1 unit
× 8 unit
Timer 0 (8-bit timer)
Timer count (Up count), external event count, timer pulse output,
PWM output (Cycle is fixed), compare register with double buffer
Clock source : clksp, clksp/4, clksp/16, clksp/32, clksp/64, clksp/128, clkbus/2, clkbus/4, clkbus/8, clkx, external clock
Timer 1 (8-bit timer)
Timer count (Up count), external event count, timer pulse output,
16-bit cascade connection (to timer 0), compare register with double buffer
Clock source : clksp, clksp/4, clksp/16, clksp/32, clksp/64, clksp/128, clkbus/2, clkbus/4, clkbus/8, clkx, external clock
Ver. AEM
3