GX-3S Datasheet, PDF (4/10 Pages) Panasonic Semiconductor – Cylindrical Compact Inductive Proximity Sensor GX SERIES

GX Cylindrical Compact Inductive Proximity Sensor
SERIES
814
SPECIFICATIONS
FIBER
SENSORS
Non-threaded type
LASER
SENSORS
Type
Flexible cable
Shielded type
Flexible cable
Flexible cable
Item
Model No. GX-3S GX-3SB GX-3S-R GX-3SB-R GX-4S GX-4SB GX-4S-R GX-4SB-R GX-5S GX-5SB GX-5S-R GX-5SB-R
Max. operation distance (Note 2)
0.8 mm 0.031 in ±15 %
1 mm 0.039 in ±15 %
Stable sensing range (Note 2)
0 to 0.6 mm 0 to 0.024 in
0 to 0.8 mm 0 to 0.031 in
Standard sensing object
Iron sheet 5 × 5 × t 1 mm 0.197 × 0.197 × t 0.039 in
Iron sheet 6 × 6 × t 1 mm 0.236 × 0.236 × t 0.039 in
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
Hysteresis
Repeatability
Supply voltage
15 % or less of operation distance (with standard sensing object)
20 μm 0.787 mil or less
8 μm 0.315 mil or less
12 to 24 V DC ±10 %   Ripple P-P 10 % or less
10 to 30 V DC   Ripple P-P 10 % or less
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Current consumption
Output
Utilization category
Output operation
Short-circuit protection
Max. response frequency
15 mA or less
NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 0.4 V or less (at 50 mA sink current)
NPN open-collector transistor
• Maximum sink current: 200 mA (Note 3)
• Applied voltage: 30 V DC or less
(between output and 0 V)
• Residual voltage: 1.5 V or less
(at 200 mA sink current)
0.4 V or less
(at 50 mA sink current)
DC-12 or DC-13
Normally Normally Normally Normally Normally Normally Normally Normally Normally Normally Normally Normally
open
closed open
closed open
closed open
closed open
closed open
closed
–
Incorporated
1 kHz
1.5 kHz
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
Operation indicator
Pollution degree
Protection
Ambient temperature
Ambient humidity
EMC
Red LED (lights up when the output is ON)
3 (Industrial environment)
IP67 (IEC)
–25 to + 70 °C –13 to +158 °F, Storage: –25 to +80 °C –13 to +176 °F
35 to 95 % RH, Storage: 35 to 95 % RH
35 to 85 % RH, Storage: 35 to 95 % RH
EN 60947-5-2
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Sensing
range
variation
Temperature
characteristics
Voltage
characteristics
Material
Cable
500 V AC for one min. between all supply terminals connected together and enclosure
5 MΩ, or more, with 250 V DC megger between all supply terminals connected 50 MΩ, or more, with 500 V DC megger between all
together and enclosure
supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each
200 m/s² acceleration (20 G approx.) in X, Y and Z directions for ten times each
Over ambient temperature range –25 to +70 °C –13 to +158 °F: Within ±20 % of
sensing range at +20 °C +68 °F
Within ±2 % for ±10 % fluctuation of the supply voltage
Enclosure: Stainless steel (SUS304), Resin part: TPX
300 m/s² acceleration (30 G approx.) in
X, Y and Z directions for ten times each
Over ambient temperature range –25 to+70 °C –13 to
+158 °F: Within ±15 % of sensing range at +20 °C +68 °F
Within ±2.5 % for ±15 % fluctuation of
the supply voltage
Enclosure: Brass (Nickel plated)
Resin part: ABS
0.08 mm² 3-core oil, heat 0.1 mm² 3-core flexible, oil 0.08 mm² 3-core oil, heat 0.1 mm² 3-core flexible, oil 0.14 mm² 3-core oil, heat 0.15 mm² 3-core flexible, oil
and cold resistant cabtyre and heat resistant cabtyre and cold resistant cabtyre and heat resistant cabtyre and cold resistant cabtyre and heat resistant cabtyre
cable, 3 m 9.843 ft long cable, 3 m 9.843 ft long cable, 3 m 9.843 ft long cable, 3 m 9.843 ft long cable, 3 m 9.843 ft long cable, 3 m 9.843 ft long
Cable extension
Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.
Weight
Net weight: 30 g approx.
Net weight: 55 g approx.
Accessories
MS-SS3 (Sensor mounting bracket): 1 pc.
MS-SS3-2 (C bracket): 1 pc.
–
MS-SS5 (Sensor mounting bracket): 1 pc.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
3) The maximum sink current varies depending on the ambient temperature. Refer to “I/O CIRCUIT AND WIRING DIAGRAMS” for details.
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Amplifier
Built-in
Amplifier-
separated
GX-F/H
GXL
GL
GX-U/GX-FU/
GX-N
GX