EXC-14CE900U Datasheet, PDF (4/12 Pages) Panasonic Semiconductor – PRODUCT SPECIFICATION FOR APPROVAL

Classification
Specification
Product Name
Common Mode Noise Filter (Type EXC14CE)
No.
151-EXC-14CE202S
Page
3 of 11
8. Performance Characteristics
Standard test condition
Temperature: 15 to 35 °C
Relative humidity: 25 to 85 %
Atmospheric pressure: 86 to 106 kPa
When there are questions concerning measurement result
Temperature: 20±2 °C
Relative humidity: 60 to 70 %
Atmospheric pressure: 86 to 106 kPa
8-1. Mechanical Characteristics
Item
Test Method
Solderability
Preheating temperature: 150 °C
Preheating time: 1 min
Solder temperature: 230±5 °C
Duration: 3±0.5 s
Immersion speed: 25 mm/s
Resistance to
Soldering Heat
Preheating temperature: 150 °C
Preheating time: 1 min
Solder temperature: 260±5 °C
Duration: 10±0.5 s
Immersion speed: 25 mm/s
Recovery:
48±4 hours of recovery under the
standard condition after the test.
Bending Strength
Warp: 2 mm
Testing board: Glass-epoxy
Thickness: 1.0 mm
20
R230
t=1
F
Specification
At least 90 % of each termination is
covered with the new solder.
Impedance variation: within ±30 %
Remaining terminal: 70 % min.
No abnormality of appearance
Impedance variation: within ±30 %
Vibration
45
45
2
Directions: 2 h each in X, Y, and Z
directions (Total: 6 h)
Frequency range: 10 to 55 to 10 Hz
(Sweep rate: 1 min)
Amplitude: 1.5 mm
No abnormality of appearance
Impedance variation: within ±30 %
Constitution
July. 28, 2008
Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.