MN101D07G Datasheet, PDF (3/5 Pages) Panasonic Semiconductor – MN101D07G

 XDS
Built-in U.S. closed caption data slicer (optional 2 line data can be extracted.)
 I/O Pins
I/O
Input
85
Common use : 71
2
Common use : 2
 A/D converter
8-bit × 14-ch. (without S/H)
 PWM
13-bit × 2-ch. (at repetition cycle 572 ms at 14.32 MHz),
10-bit × 2-ch. (at repetition cycle 71.5 ms at 14.32 MHz),
8-bit × 1-ch. (at repetition cycle 71.5 ms, 0.572 ms, 1.14 ms, 2.29 ms at 14.32 MHz)
 ICR
18-bit × 6-ch.
 OCR
16-bit × 2 (8-bit synchronous output; 4-bit 3-state synchronous output),
16-bit × 1 (weak electric field V-sync backup), 16-bit × 1 (Rec CTL)
 Special Ports
Buzzer output; 3-state output VLP pin; remote control receive;
CTL signal input terminal; Capstan FG inputterminal; Sylinder(Durm) PG/FG input terminals;
HSW output terminal; Head Amp/Rortary control output terminals;
output of 1/2 OSC oscillation clock (2 V[p-p]); output of 1/4 OSC oscillation clock (1 V[p-p])
 ROM Correction
Correcting address designation : up to 3 addresses possible
Correction method : correction program being saved in internal RAM
 Electrical Charactreistics (Supply current)
Parameter
Symbol
Condition
Operating supply current
Supply current at STOP
Supply current at HALT
IDD1
IDD2
IDD3
IDSP
IDHT0
IDHT1
14.32 MHz operation without load, VDD = 5 V
1/1024 of 14.32 MHz operation without load
VDD = 3.0 V
Stop of 14.32 MHz oscillation, VDD = 2.7 V
32 kHz oscillation operation without load
Stop of oscillation without load, VDD = 5 V, Ta = 55°C
14.32 MHz oscillation without load, VDD = 5 V
Stop of 14.32 MHz oscillation, VDD = 2.7 V
32 kHz oscillation operation without load
Limit
Unit
min typ max
60 100 mA
2
5 mA
50 100 µA
10 µA
5 15 mA
5 20 µA
(Ta = 25°C±2°C , VSS = 0 V)
 Electrical Charactreistics (A/D converter characteristics)
Parameter
Symbol
Condition
Conversion relative error
A/D Conversion Time
Analog Input Voltage
∆NLAD
tAD fosc = 14.32 MHz
Limit
Unit
min typ max
±3 LSB
8
µｓ
5V
(Ta = 25°C±2°C , VDD = 5.0 V , VSS = 0 V)
 Development tools
In-circuit Emulator
PX-ICE101C/D + PX-PRB101D07-LQFP112-P-2020-M
MAD00030GEM