MN101C97 Datasheet, PDF (3/8 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101C97 Series
 Features (Continued)
 Memory bank:
Data memory space expansion by bank form (64 KB/2 bank)
Bank for source address / Bank for destination address
 Interrupts: 20 interrupts
<External Interrupt> Rising/ falling edge can be specified.
IRQ0 - External Interrupt (Noise filter connectable)
IRQ1 - External Interrupt (Noise filter connectable)
IRQ2 - External Interrupt (Both edges selectable)
IRQ3 - External Interrupt (Both edges selectable)
IRQ4 - External Interrupt (Both edges selectable)
IRQ5 - External Interrupt (Both edges selectable)
IRQ6 - External Interrupt (Key scan interrupt only)
<Timer Interrupt>
TM0IRQ - Timer 0 interrupt (8-bit timer)
TM1IRQ - Timer 1 interrupt (8-bit timer)
TM2IRQ - Timer 2 interrupt (8 bit timer)
TM3IRQ - Timer 3 interrupt (8-bit timer)
TM6IRQ - Timer 6 interrupt (8-bit timer)
TM7IRQ - Timer 7 interrupt (16-bit timer)
T7OC2IRQ - Timer 7 interrupt (16-bit timer)
TBIRQ - Time base timer interrupt
<Serial Interface Interrupt>
SC0RIRQ - Serial 0 interrupt (UART reception)
SC0TIRQ - Serial 0 interrupt (UART transmission, Synchronous)
SC3IRQ - Serial 3 interrupt (Single master IIC, Synchronous)
<Watchdog Timer Interrupt>
NMI - Watchdog timer overflow
<A/D Conversion End Interrupt>
ADIRQ - A/D conversion end
 A/D Converter: 10 bit × 8 channels
 Timer Counter: 8 timers
All timer counters generate Interrupt.
Timer 0 - 8-bit timer
Square wave output, PWM output, Event count, Simple pulse width measurement
Added pulse (2-bit) PWM output, Remote control carrier output
Clock source: fosc, fosc/4, fosc/16, fosc/32, fosc/64, fs/2, fs/4, fx, external clock
Square wave output and PWM output can be output to the large current pin, P51 (TM0O).
Timer 1 - 8-bit timer
Square wave output, Event count, Cascade connection to timer 0
Clock source: fosc, fosc/4, fosc/16, fosc/64, fosc/128, fs/2, fs/8, fx, external clock, timer 7 output
Usable as UART baud rate timer
Timer 2 - 8-bit timer
Square wave output, PWM output, Event count, Simple pulse width measurement
Clock source: fosc, fosc/4, fosc/16, fosc/32, fosc/64, fs/2, fs/4, fx, external clock
Added pulse (2-bit) PWM output
Square wave output and PWM output can be output to the large current pin, P52 (TM2O).
Usable as UART baud rate timer
Ver. JEM
3