ARE10A12 Datasheet, PDF (3/5 Pages) Panasonic Semiconductor – 2.6 GHz SMALL MICROWAVE RELAYS

RE (ARE)
2. Specifications
Characteristics
Contact
Rating
High frequency
characteristics (Initial)
(Impedance 75Ω)
High frequency
characteristics (Initial)
(Impedance 50Ω)
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
Item
Arrangement
Contact material
Initial contact resistance, max.
Contact rating
Contact carrying power
Max. switching voltage
Max. switching current
Nominal operating power
V.S.W.R.
Insertion loss
Isolation
V.S.W.R.
Insertion loss
Isolation
Insulation resistance (Initial)
Breakdown
voltage
(Initial)
Between open contacts
Between contact and coil
Between contact and earth terminal
Temperature rise (at 20°C)
Operate time (at 20°C)
Release time (at 20°C)
Shock
resistance
Vibration
resistance
Mechanical
Functional
Destructive
Functional
Destructive
Electrical
Conditions for operation, transport and storage*
Specifications
1 Form C
Gold plating
Max. 100mΩ (By voltage drop 10V AC 10mA)
1W (at 2.6 GHz [Impedance 75Ω;, V.S.W.R. Max.1.5] [Impedance 50Ω, V.S.W.R. Max.1.7])
10mA 24V DC (resistive load)
10W (at 2.6GHz [Impedance 75Ω, V.S.W.R. Max.1.5] [Impedance 50Ω, V.S.W.R. Max.1.7])
30V DC
0.5A DC
200mW
Max. 1.2 (to 900MHz), Max. 1.5 (to 2.6GHz)
Max. 0.2dB (to 900MHz), Max. 0.5dB (to 2.6GHz)
Min. 60dB (to 900MHz), Min. 30dB (to 2.6GHz)
Max. 1.3 (to 900MHz), Max. 1.7 (to 2.6GHz)
Max. 0.2dB (to 900MHz), Max. 0.7dB (to 2.6GHz)
Min. 60dB (to 900MHz), Min. 30dB (to 2.6GHz)
Min. 100MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
500 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
500 Vrms for 1min. (Detection current: 10mA)
Max. 60°C (By resistive method, nominal voltage applied to the coil: Contact carrying power:
10W, at 2.6GHz, [Impedance 75Ω, V.S.W.R. 1.5] [Impedance 50Ω, V.S.W.R. 1.7])
Max. 10ms (Nominal operating voltage applied to the coil, excluding contact bounce time.)
Max. 5ms (Nominal operating voltage applied to the coil, excluding contact bounce time.)
(without diode)
Min. 500 m/s² {50 G} (Half-wave pulse of sine wave: 11ms; detection time: 10µs.)
Min. 1,000m/s² {100 G} (Half-wave pulse of sine wave: 6ms.)
10 to 55 Hz at double amplitude of 3mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5mm
Min. 10⁶ (at 180 cpm)
Min. 3×10⁵ (1W, 2.6GHz, [Impedance 75Ω, V.S.W.R. 1.5] [Impedance 50Ω, V.S.W.R. 1.7])
Min. 3×10⁵ (10mA 24V DC (resistive load) (at 20cpm))
Ambient temperature: –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Approx. 5 g .18 oz
Note: * The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to [6] AMBIENT ENVIRONMENT
in GENERAL APPLICATION GUIDELINES.
REFERENCE DATA
1-(1). High frequency characteristics (Impedance 50Ω) (Standard PC board terminal)
• V.S.W.R. characteristics
1.9
1.8
1.7
COM-NO
1.6
1.5
1.4
1.3
COM-NC
1.2
1.1
1
900MHz
3GHz
Frequency
• Insertion loss characteristics
0
0.1
0.2
COM-NC
0.3
0.4
0.5
0.6
0.7
COM-NO
0.8
0.9
1.0
900MHz
3GHz
Frequency
• Isolation characteristics
0
10
20
30
COM-NC
40
50
60
70
COM-NO
80
90
100
900MHz
3GHz
Frequency
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
ASCTB104E 201202-T