EZA-EG1A50AC Datasheet, PDF (2/6 Pages) Panasonic Semiconductor – ESD Suppressor

ESD Suppressor
■ Ratings
Type
(inches)
EZAEG1A (0201)
EZAEG2A (0402)
EZAEG3A (0603)
Capacitance⁽¹⁾
0.04^{+–00..0034} pF
0.05^{+–00..0045} pF
0.10^{+–00..0180} pF
Peak Voltage⁽²⁾
500 V max.
(350 V typ.)
Clamping
Voltage⁽³⁾
100 V max.
Rated Voltage
Category Temperature Range
(Operating Temperature Range)
30 V max
–55 to +125 °C
(1) Capacitance = The capacitance value shall be measured under the conditions specified below.
Frequency : 1 MHz±10 %, Voltage : 1 Vrms±0.2 Vrms, Temperature : 25 °C±2 °C
(2) Peak Voltage = The peak voltage value shall be measured under the following conditions. ESD test conditions : IEC61000-4-2, 8 kV contact discharge
(3) Clamping Voltage = The clamping voltage value shall be measured at 30 ns after initiation of pulse and measured under the conditions specified below.
ESD test conditions : IEC61000-4-2, 8 kV contact discharge
■ Frequency Characteristics
5
0
-5
-10
-15
-20
-25
-30
1
10
100
1000
Frequency(MHz)
10000
■ ESD Suppression Voltage Waveform
400
350
300
250
200
150
100
50
0
-50-20 _{0 20 40 60 80 100 120 140 160 180 200}
Times (nSecs)
■ Typical Circuits Requiring Protection
● HDMI circuit
HDMI Controller
HDMI
Rx/Tx
● Antenna circuit
Antenna
Ga/As-SW
or
ASM
■ Packaging Methods (Taping)
● Standard Quantity
Type
Kind of Taping
EZAEG1A
EZAEG2A
Pressed Carrier Taping
EZAEG3A
Punched Carrier Taping
Pitch (P1)
2 mm
4 mm
Quantity
15000 pcs./reel
10000 pcs./reel
5000 pcs./reel
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2009