AQ2A2-C1-T5VDC Datasheet, PDF (1/7 Pages) Panasonic Semiconductor – SIL type SSR with 9mm thickness controls up to 3A

AQ8
SIL type SSR with
9mm thickness
controls up to 3A
Please contact us about TÜV certified products.
AQ8 RELAYS
Compliance with RoHS Directive
FEATURES
1. Slim with 9 mm .354 inch thickness
The thin type (45 mm long × 24 mm high
× 9 mm wide) (1.772×.945×.354 inch)
permits high density mounting.
2. Excellent in noise resistance
Since the input and output are insulated
by the phototriac coupler, the noise on
the output side is not fed back to the input
side.
3. Snubber circuit integrated
The snubber circuit is integrated to
prevent malfunction caused by the rapid
rise of the voltage on the output side,
such as inductive load and noise.
4. Zero-cross and random types are
available.
The zero-cross type generates minimal
noise by suppressing occurrence of radio
frequency interference (RFI) and electro-
magnetic interference (EMI).
The random type features a short
operation time which permits phase
control.
5. High dielectric strength: 3,000 V AC
(between input and output)
6. Two kinds of terminals distance are
available. (5.08 mm and 7.62 mm) (.200
and .300 inch)
7. High reliability, long life and
maintenance-free
TYPICAL APPLICATIONS
Most suitable as drivers for small size AC
motors, solenoids, solenoid valves and
so on.
1. Copying equipment
2. Air conditioners
3. Industrial equipment such as NC
machines, sequencers, robots, etc.
ORDERING INFORMATION
Load current
2A
3A
Load voltage
1: 75 to 125 V AC
2: 75 to 250 V AC
Input terminal distance
C1: 5.08 mm .200 inch
C2: 7.62 mm .300 inch
Type
ZT: Zero-cross type
T: Random type
Input voltage
5, 12, 24 V DC
AQ
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.