ES2A Datasheet, PDF (1/2 Pages) Jinan Gude Electronic Device – 2.0AMP. SUPER FAST RECOVRY SILICON RECTIFIERS

ES2A thru ES2J
SURFACE MOUNT SUPERFAST RECTIFIER
VOLTAGE - 50 TO 600 VOLTS CURRENT - 2.0 AMPERES
SMA/DO-214AC
.055(1.40)
.062(1.60)
.098(2.50)
.114(2.90)
.078(2.00)
.096(2.44)
.157(4.00)
.181(4.60)
.006(.152)
.012(.305)
.030(0.76)
.060(1.52)
.004(.102)
.008(.203)
.188(4.80)
.208(5.28)
Dimensions in inches and (millimeters)
FEATURES
For surface mount applications
Low profile package
Buit-in strain relief
Easy pick and place
Superfast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated junction
High temperature soldering 260^oC/10seconds at terminals
Pb free product are available 99% Sn above can meet RoHS
Environment substance directive request
MECHANICAL DATA
Case JEDEC DO-214AC molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Indicated by cathode band
Standard packaging 16mm tape (EIA-481)
Weight 0.093grams
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL ES2A ES2B ES2C ES2D ES2F _{ES2G ES2H ES2J}
Maximum Repetitive Peak Reverse Voltage
VRRM 50 100 150 200 300 400 500 600
Maximum RMS Voltage
VRMS 35 70 105 140 210 280 350 420
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current @ TL =100⁰C I(AV)
50 100 150 200 300 400 500 600
2.0
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method)
IFSM
50
Maximum Instantaneoue Forward Voltage at 2.0A
VF
Maximum DC Reverse Current @TJ=25⁰C
at Rated DC Blocking Voltage @TJ=100⁰C
IR
0.95
1.3
1.7
10
350
Maximum Reverse Recovery Time (NOTE 1)
Typical Junction Capacitance (NOTE 2)
TRR
35
CJ
25
20
Typical Thermal Resistance (NOTE 3)
R JA
75
R JL
20
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
A
nS
pF
0_{C / W}
Operating and Storage Temperature Range
TJ
-55 to +150
0_C
TSTG
NOTES
1. Rverse Recovery Test Condibons IF=0.5A, IR=1.0A, lRR=0.25A
2. Measured at 1 MHz and applied reverse Voltag of 4.0VDC
3. Units Mounted on P.C.B.0.2 X0.2 (5mmX5mm) Pad Areas
www.paceleader.tw
1