PLBT5050-WCR08 Datasheet, PDF (9/10 Pages) P-tec Corporation – 5.0mm x 5.0mm SMT LED, 1.5mm

3. How to set the height of collet
Additional Notes
A. No pressure should be exerted onto the epoxy shell of the SMD under high temperature
B. Do not scratch of wipe the lens.
C. LED should be used as soon as possible when being taken out of the original package, and should be
stored in anti-moisture and anti-ESD packaging
www.p-tec.net
040715 Rev1 JAS
Page 9 of 10