PLBT5050-WCR08 Datasheet, PDF (4/10 Pages) P-tec Corporation – 5.0mm x 5.0mm SMT LED, 1.5mm

IR Reflow Temperature / Time
Notes:
1. We recommend reflow temp of 245°C (+/- 5°C) Maximum soldering temp should be limited to 260°C
2. Do not cause stress to the silicon resin while it is exposed to high temperatures
3. Number of reflow process shall be 1 time
www.p-tec.net
040715 Rev1 JAS
Page 4 of 10