PLBT5252 Datasheet, PDF (14/15 Pages) P-tec Corporation – High Power 5252 LED

Correct ( √ )
Wrong ( X )
4. Lens cleaning
In the case which a small amount of dirt and dust particles remain on the lens surface, a suitable cleaning solution can be
applied.
4.1 Try a gentle wiping with dust-free cloth
4.2 If needed, use dust-free cloth and isopropyl alcohol to gently clean the dirt from the lens surface.
4.3 Do not use other solvents as they may directly react with the LED assembly
4.4 Do not use ultrasonic cleaning which will damage the LEDs
5. Carrier tape handling
The following items are recommended when handling the carrier tape of LEDs
5.1 Do not twist the carrier tape
5.2 The inward bending diameter should not be smaller than 6cm for each carrier tape.
5.3 Do not bend the tape outward.
<6cm
www.p-tec.net
102214 Rev0 JAS
Page 14 of 15