PLBT5252 Datasheet, PDF (13/15 Pages) P-tec Corporation – High Power 5252 LED

Precautions
1. Recommendation for using LEDs
1.1 The lens of LEDs should not be exposed to dust or debris. Excessive dust and debris may cause a drastic decrease
in the luminosity.
1.2 Avoid mechanical stress on LED lens.
1.3 Do not touch the LED lens surface. It would affect the optical performance of the LED due to the LED lens’
damage.
1.4 Pick & place tools are recommended for the remove of LEDs from the factory tape & reel packaging
2. Pick & place nozzle
The pickup tool was recommended and shown as below
3. Lens handling
Please follow the guideline to pick LEDs
3.1 Use tweezers to pick LEDs
3.2 Do not touch the lens by using tweezers
3.3 Do not touch lens with fingers
3.4 Do not apply more than 4N of lens (400g) directly onto the lens
www.p-tec.net
102214 Rev0 JAS
Page 13 of 15