TRSL-9115WG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 2.5 Gbps RoHS Compliant SFF LC 2X10 SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-9115WG
***********************************************************************************************************************************************************************
TRSL-9115WG / TRSL-9115AWG
3.3V / 1310 nm / 2.5 Gbps RoHS Compliant SFF LC 2X10 SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-48 IR / SDH STM-16 (S-16.1) Compliant
l Compliant with Fiber Channel 2X/1X SM-LC-L FC-PI
l Compliant with IEEE 802.3z Gigabit Ethernet
l Multi-sourced 2X10 SFF Package Style
l 1310 nm DFB LD Transmitter
l 13 dB Link Power Budget At Least
l Analog Monitor Function
The TRSL-9115WG series single mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-48 IR / SDH STM-16 (S-16.1), IEEE 802.3z
Gigabit Ethernet and 1X/2X Fiber channel. This module is
designed for single mode fiber and operates at a nominal
wavelength of 1310 nm. The transmitter section uses a
multiple quantum well 1310 nm DFB laser and is a class 1
-- Transmitter Laser Bias Current
laser compliant according to International Safety Standard
-- Transmitter Laser Optical Power Monitor
IEC-60825. The receiver section uses an integrated InGaAs
-- Receiver Photo Detector Current
l AC/AC Coupled Signal Input / Output
l LVPECL Signal Input / Output
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
l RoHS Compliant
l 0 to 70^oC Operation: TRSL-9115WG
l -20 to 85^oC Operation: TRSL-9115AWG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
Compliant
or with a dust plug
APPLICATIONS
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
ORDER INFORMATION
P/No.
Bit Rate SONET
(Mb/s)
/SDH
TRSL-9115WG
2488 IR-1/S-16.1
TRSL-9115AWG
2488 IR-1/S-16.1
Distance
(km)
15
15
Wavelength
(nm)
1310 DFB
1310 DFB
Package
2X10 LC
2X10 LC
Temp. TX Power
(^oC)
(dBm)
0 to 70 0 to -5
-20 to 85 0 to -5
RX Sens. RoHS
(dBm) Compliant
-18
Yes
-18
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Min
Max
Units
Notes
Tstg
-40
85
o_C
Topr
0
70
o_C
TRSL-9115WG
Soldering Temperature
-20
85
TRSL-9115AWG
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
-0.5
3.6
V
Input Voltage
---
-0.5
Vcc
V
Output Current
Iout
0
50
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
Topr
0
70
o_{C / TRSL-9115WG}
-20
85
o_{C / TRSL-9115AWG}
air flow 1m/sec
Data Rate
622
2500
2700
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 3/1/2004 V1.0