OP165_06 Datasheet, PDF (3/4 Pages) OPTEK Technologies – Plastic Infrared Emitting Diode

Plastic Infrared Emitting Diode
OP165, OP166 Series
Absolute Maximum Ratings (T_A=25°C unless otherwise noted)
Storage and Operating Temperature Range
Reverse Voltage
Continuous Forward Current
Peak Forward Current (1 µs pulse width, 300 pps)
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]
Power Dissipation
-40^o C to +100^o C
2.0 V
50 mA
3.0 A
260° C⁽¹⁾
100 mW⁽²⁾
Electrical Characteristics (T_A = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode
E_{E (APT)}
Apertured Radiant Incidence
OP165A, OP166A
1.95 -
-
mW/cm² I_F = 20 mA⁽³⁾
P_O
Radiant Power Output
OP165W, OP166W
0.50 -
-
mW I_F = 20 mA
V_F Forward Voltage
I_R
Reverse Current
λ_P
Wavelength at Peak Emission
B
Spectral Bandwidth between Half Power
Points
-
- 1.60
V I_F = 20 mA
-
- 100 µA V_R= 2 V
- 935 -
nm I_F = 10 mA
-
50
-
nm I_F = 10 mA
Spectral Shift with Temperature
∆λ_P /∆T
OP165, OP166 (A, B, C, D)
OP165W, OP166W
-
-
-
- ±0.30 -
nm/°C I_F = Constant
Emission Angle at Half Power Points
θ_HP
OP165, OP166 (A, B, C, D)
OP165W, OP166W
-
18
- Degree I_F = 20 mA
-
90
-
t_r
Output Rise Time
t_f
Output Fall Time
- 1000 -
- 500 -
ns
I_F(PK)=100 mA, PW=10 µs, D.C.=10.0%
ns
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 07/06
Page 3 of 4