OP165_06 Datasheet, PDF (1/4 Pages) OPTEK Technologies – Plastic Infrared Emitting Diode

Plastic Infrared Emitting Diode
OP165, OP166 Series
Features:
• T-1 (3 mm) package style
• Choice of narrow or wide irradiance pattern
• Choice of dome lens or flat lens
• Mechanically and spectrally matched to other OPTEK devices
• Higher power output than GaAs at equivalent drive currents
• 935 nm diode
Description:
Each device in the OP165 and OP166 series is a high intensity gallium arsenide infrared emitting diode (GaAIAs)
that is molded in an IR transmissive clear or amber-tinted epoxy package with either a dome or flat lens. Devices
feature narrow and wide irradiance patterns and a variety of electrical characteristics. The small T-1 package style
makes these devices ideal for space-limited applications.
OP165 and OP166 devices are mechanically and spectrally matched to the OP505 and OP535 series devices.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data.
Applications:
• Space-limited applications
• Applications requiring coupling
efficiency
• Battery-operated or voltage-limited
applications
Ordering Information
Part
LED Peak Output Power (mW/ I_F (mA) Total Beam Lead
Number Wavelength
cm²) Min / Max
Typ / Max Angle Length
OP165A
OP165B
OP165C
OP165D
OP165W
OP166A
OP166B
OP166C
OP166D
OP166W
935 nm
1.95 / NA
1.40 / 2.20
0.85 / 1.60
0.28 / NA
0.50 / NA
1.95 / NA
1.40 / 2.20
0.85 / 1.60
0.28 / NA
0.50 / NA
18°
20 / 50
90°
0.50"
18°
90°
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 07/06
Page 1 of 4