English
Language : 

JAN4N48 Datasheet, PDF (3/4 Pages) OPTEK Technologies – JAN4N48
◁
Hi-Reliability Optically Coupled Isolator
JAN / JANTX / JANTXV 4N47, 4N48, 4N49 [A]
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode
VF Forward Voltage
IR Reverse Current
Output Phototransistor
V(BR)CEO
V(BR)CBO
V(BR)EBO
IC(OFF)1
IC(OFF)2
ICB(OFF)
Collector-Emitter Breakdown Voltage
Collector-Base Breakdown Voltage
Emitter-Base Breakdown Voltage
Collector-Emitter Dark Current
Collector-Emitter Dark Current
Collector-Base Dark Current
Coupled
On-State Collector Current
JAN / JANTX / JANTXV 4N47 [A]
IC(ON) JAN / JANTX / JANTXV 4N48 [A]
JAN / JANTX / JANTXV 4N49 [A]
ICB(ON)
VCE(SAT)
On-State Collector Base
Collector-Emitter Saturation Voltage
JAN / JANTX / JANTXV 4N47 [A]
JAN / JANTX / JANTXV 4N48 [A]
JAN / JANTX / JANTXV 4N49 [A]
HFE DC Current Gain
RIO Resistance (Input-to-Output)
CIO Capacitance (Input-to-Output)
0.80
-
1.50
IF = 10.0 mA
1.00
-
1.70
V IF = 10.0 mA, TA = -55° C(1)
0.70
-
1.30
IF = 10.0 mA, TA = 100° C(1)
-
-
100
µA VR= 2.0 V
40
-
-
V
IC = 1.0 mA, IB= 0, IF= 0
45
-
-
V IC = 100 µA, IB= 0, IF= 0
7
-
-
V IE = 100 µA, IC= 0, IF= 0
-
-
100
nA VCE = 20 V, IB= 0, IF= 0
-
-
100
µA VCE = 20 V, IB= 0, IF= 0, TA = 100° C(1)
-
-
10
nA VCB = 20 V, IE= 0, IF= 0
0.50
-
0.70
-
0.50
-
1.00
-
1.40
-
1.00
-
2.00
-
2.80
-
2.00
-
30
-
-
IF = 1.0 mA, VCE = 5.0 V, IB = 0
-
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C(1)
-
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C(1)
5
IF = 1.0 mA, VCE = 5.0 V, IB = 0
-
mA IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C(1)
-
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C(1)
10
IF = 1.0 mA, VCE = 5.0 V, IB = 0
-
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C(1)
-
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C(1)
-
µA VCB = 5 V, IE = 0, IF = 10 mA
-
-
-
-
0.30
0.30
V
IF = 2.0 mA, IC = 0.5 mA, IB = 0
IF = 2.0 mA, IC = 1.0 mA, IB = 0
-
-
0.30
IF = 2.0 mA, IC = 2.0 mA, IB = 0
100
-
-
V VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
1011
-
-
Ω
VI-O = ± 1000 VDC(3)
-
-
5
pF VI-O = 0 V, f = 1.0 MHz(3)
TR, TF Rise and Fall Time
-
-
20
µs VCC = 10.0 V , IF = 5.0 mA, RL = 100 Ω
Notes:
1. Guaranteed but not tested.
2. Sample tested, LTPD = 10.
3. Measured with input leads shorted together and output leads shorted together.
This product is built, tested and shipped from the USA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue E 01/2014
Page 3 of 4
 ▷