JAN4N48 Datasheet, PDF (2/4 Pages) OPTEK Technologies – JAN4N48

Hi-Reliability Optically Coupled Isolator
JAN / JANTX / JANTXV 4N47, 4N48, 4N49 [A]
Absolute Maximum Ratings (T_A = 25° C unless otherwise noted)
Storage Temperature Range
Operating Temperature Range
Input-to-Output Isolation Voltage
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]
Input Diode
Forward DC Current (65° C or below)
Reverse Voltage
Power Dissipation
Output Phototransistor:
Continuous Collector Current
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
Power Dissipation
Notes:
1. Measured with input leads shorted together and output leads shorted together.
2. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
3. Derate linearly 1.0 mW/° C above 65° C.
4. Derate linearly 3.0 mW/° C above 25° C.
-55° C to +150° C
-55° C to +125° C
± 1.00 kVDC⁽¹⁾
260° C⁽²⁾
40 mA
2V
60 mW⁽³⁾
50 mA
40 V
45 V
7.0 V
300 mW⁽⁴⁾
Ordering Information
Part
Number
Isolation
Voltage (kV)
I_F (mA)
Typ / Max
V_CE
(Volts)
Max
Processing
MIL-PRF-
195000
JAN4N47 or JAN4N47A
JANTX4N47 or JANTX4N47A
JANTXV4N47 or JANTXV4N47A
JAN4N48 or JAN4N48A
JANTX4N48 or JANTX4N48A
1
1 / 40
40
548
JANTXV4N48 or JANTXV4N4A8
JAN4N49 or JAN4N49A
JANTX4N49 or JANTX4N49A
JANTXV4N49 or JANTXV4N49A
This product is built, tested and shipped from the USA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue E 01/2014
Page 2 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com