 English |
|
|
|
|
|
|
|
| JAN4N22 Datasheet, PDF (3/4 Pages) OPTEK Technologies – Hi-Reliability Optically Coupled Isolator | |||
| |||
| ◁ |
Hi-Reliability Optically Coupled Isolator
JAN / JANTX / JANTXV 4N22, 4N23, 4N24 [A]
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Onput Diode
VF Forward Voltage
IR Reverse Current
Output Phototransistor
V(BR)CEO
V(BR)CBO
V(BR)EBO
Collector-Emitter Breakdown Voltage
Collector-Base Breakdown Voltage
Emitter-Base Breakdown Voltage
IC(OFF) Collector-Emitter Dark Current
ICB(OFF) Collector-Base Dark Current
Coupled
On-State Collector Current
JAN / JANTX / JANTXV 4N22 [A]
IC(ON) JAN / JANTX / JANTXV 4N23 [A]
JAN / JANTX / JANTXV 4N24 [A]
VCE(SAT)
Collector-Emitter Saturation Voltage
JAN / JANTX / JANTXV 4N22 [A]
JAN / JANTX / JANTXV 4N23 [A]
JAN / JANTX / JANTXV 4N24 [A]
HFE DC Current Gain
RIO Resistance (Input-to-Output)
CIO Capacitance (Input-to-Output)
TR, TF Output Rise and Fall Time
0.80
-
1.50
IF = 10.0 mA
1.00
-
1.70
V
IF = 10.0 mA, TA = -55° C(1)
0.70
-
1.30
IF = 10.0 mA, TA = +100° C(1)
-
-
100
µA VR= 2.0 V
40
-
-
V IC = 1.0 mA, IB= 0, IF= 0
45
-
-
V IC = 100 µA, IB= 0, IF= 0
7
-
-
V IE = 100 µA, IC= 0, IF= 0
-
-
100
nA VCE = 20 V, IB= 0, IF= 0
100
µA VCE = 20 V, IB= 0, IF= 0, TA = 100ºC
-
-
100
nA VCB = 20 V, IE= 0, IF= 0
0.15 -
2.50 -
1.00 -
1.00
-
0.20 -
6.00 -
2.50 -
2.50 -
0.40 -
10.0 -
4.00 -
4.00 -
-
IF = 2.0 mA , VCE = 5 V, IB = 0
-
IF = 10.0 mA , VCE = 5 V, IB = 0
-
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C(1)
-
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C(1)
-
IF = 2.0 mA , VCE = 5 V, IB = 0
-
-
mA
IF = 10.0 mA , VCE = 5 V, IB = 0
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C(1)
-
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C(1)
-
IF = 2.0 mA , VCE = 5 V, IB = 0
-
IF = 10.0 mA , VCE = 5 V, IB = 0
-
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C(1)
-
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C(1)
-
-
-
-
0.30
0.30
V
IF = 20 mA , IC = 2.5 mA, IB = 0
IF = 20 mA , IC = 5.0 mA, IB = 0
-
-
0.30
IF = 20 mA , IC = 10.0 mA, IB = 0
100
-
-
V VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
1011
-
-
-
-
â¦
V10 = ± 1.0 VDC(3)
5
pF VI-O = 0 V, f = 1.0 MHz(3)
-
-
20.0
µs VCC = 10.0 V , IF = 10.0 mA, RL = 100 â¦
Notes:
1.
2.
3.
Guaranteed but not tested.
Sample tested, LTPD = 10.
Measured with input leads shorted together and output leads shorted together.
This product is built, tested and shipped from the USA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. â 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue F 02/2014
Page 3 of 4
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese