JAN4N22 Datasheet, PDF (2/4 Pages) OPTEK Technologies – Hi-Reliability Optically Coupled Isolator

Hi-Reliability Optically Coupled Isolator
JAN / JANTX / JANTXV 4N22, 4N23, 4N24 [A]
Absolute Maximum Ratings (T_A = 25° C unless otherwise noted)
Storage Temperature Range
Operating Temperature Range
Input-to-Output Isolation Voltage
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]
Input Diode
Forward DC Current (65° C or below)
Reverse Voltage
Peak Forward Current (1 µs pulse width, 300 pps)
Power Dissipation
Output Sensor:
Continuous Collector Current
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
Power Dissipation
Notes:
1. Measured with input leads shorted together and output leads shorted together.
2. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
3. Derate linearly 1.0 mW/° C above 65° C.
4. Derate linearly 3.0 mW/° C above 25° C.
-65° C to +150° C
-55° C to +125° C
± 1.00 kVDC⁽¹⁾
260° C⁽²⁾
40 mA
2V
1A
60 mW⁽³⁾
50 mA
40 V
45 V
4V
300 mW⁽⁴⁾
Part
Number
Ordering Information
Isolation
I_F (mA)
Voltage (kV) Typ / Max
V_CE
(Volts)
Max
Processing
MIL-PRF-
195000
JAN4N22 or JAN4N22A
JANTX4N22 or JANTX4N22A
JANTXV4N22 or JANTXV4N22A
JAN4N23 or JAN4N23A
JANTX4N23 or JANTX4N23A
1
10 / 40
40
486
JANTXV4N23 or JANTXV4N23A
JAN4N24 or JAN4N24A
JANTX4N24 or JANTX4N24A
JANTXV4N24 or JANTXV4N24A
This product is built, tested and shipped from the USA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue F 02/2014
Page 2 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com