OVFSQ4C8 Datasheet, PDF (2/5 Pages) OPTEK Technologies – 4-Pin Red-Orange LED Lamp

4-Pin Red-Orange LED Lamp (7.6mm)
OVFSQ4C8
Absolute Maximum Ratings
T_A = 25^o C unless otherwise noted
Storage Temperature Range
-40 ~ +100°C
Operating Temperature Range
Lead Soldering Temperature (3mm from the base of the epoxy bulb)¹
-40 ~ +100°C
260°C
Reverse Voltage
Continuous Forward Current²
5V
70 mA
Peak Forward Current (10% Duty Cycle, PW ”  —VHF
200 mA
Power Dissipation
220 mW
Notes:
1. Solder time less than 5 seconds at temperature extreme.
2. Heat sink is adequate if the device is operated at ambient temperature higher than 25°C. For long term performance the drive currents
between 10mA and 50mA are recommended. Please contact an Optek sales representative for more information on recommended drive
conditions.
Electrical Characteristics
T_A = 25^o C unless otherwise noted
SYMBOL
PARAMETER
MIN
TYP
MAX UNITS
CONDITIONS
lumen
V_F
Luminous Flux
Forward Voltage
3000
4500
----
mlm
----
2.6
3.2
V
I_F = 70mA
I_F = 70mA
I_R
Reverse Current
----
----
100
µA
V_R = 5V
D
Dominant Wavelength
612
618
628
nm
I_F = 70mA
2½
50% Power Angle
----
40
----
deg
I_F = 70mA
Standard Bins (I_F = 70mA)
Lamps are sorted to luminous flux ( _V), forward voltage (V_F), and dominant wavelength ( _D) bins shown.
Orders for OVFSQ4C8 may be filled with any or all bins contained as below.
5000-7300
4000-6100
3500-4800
3000-4200
612
Dominant Wavelength (nm)
M
L
K
J
628
Luminous flux is at
J bin or above.
Forward Voltage (V_F)
Rank
V4
Voltage (V)
2.2–2.4
V5
2.4–2.6
V6
2.6–2.8
V7
2.8–3.0
V8
3.0–3.2
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
Issue 1.0 0505
Page 2
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com