OVFSQ4C8 Datasheet, PDF (1/5 Pages) OPTEK Technologies – 4-Pin Red-Orange LED Lamp

4-Pin Red-Orange LED Lamp
(7.6mm)
OVFSQ4C8
x Packaged in tubes
x Compatible with automatic placement equipment
x Compatible with infrared and vapor phase reflow solder process
x Mono-color type
x Pb-free
Product Photo Here
The OVFSQ4C8 is designed with higher forward voltage to maximize brightness and incorporates a low-profile
lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low cur-
rent requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This square
package allows high-density arrays to form light engines.
Applications
x Automotive: Rear Stop/Turn Signal Lamps/Truck Marker Lamps
x Mood-setting Decoration and Landscape Lighting
x Special Decorative Interior/Exterior Lighting
x Special Effects Stage Lighting
x Illumination for Signs and Channel Letters
x Traffic Signals, Pedestrian and Walkway Signs
Part Number
OVFSQ4C8
Material
AlInGaP
Emitted Color
Red-Orange
Flux Typ. mlm
4500
Lens Color
Water Clear
RoHS
Data is subject to change without prior notice.
2,3 ANODE
1,4 CATHODE
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com
Issue 1.0 0505
Page 1