OVFSAAC8 Datasheet, PDF (1/5 Pages) OPTEK Technologies – 4-Pin Amber LED Lamp (7.6mm)

4-Pin Amber LED Lamp (7.6mm)
OVFSAAC8
x Packaged in tubes
x Compatible with automatic placement equipment
x Compatible with infrared and vapor phase reflow solder process
x Mono-color type
x Pb-free
Product Photo Here
The OVFSAAC8 is designed with higher forward voltage to maximize brightness and incorporates a low-profile
lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low cur-
rent requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This square
package allows high-density arrays to form light engines.
Applications
x Automotive: Rear Stop/Turn Signal Lamps/Truck Marker Lamps
x Mood-setting Decoration and Landscape Lighting
x Special Decorative Interior/Exterior Lighting
x Special Effects Stage Lighting
x Illumination for Signs and Channel Letters
x Traffic Signals, Pedestrian and Walkway Signs
Part Number
OVFSAAC8
Material
AlInGaP
Emitted Color
Amber
Flux Typ. mlm
5000
Lens Color
Water Clear
RoHS
Data is subject to change without prior notice.
2,3 ANODE
1,4 CATHODE
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com
Issue 1.0 0505
Page 1